Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
mjock3  
#1 Posted : Monday, August 20, 2012 7:11:11 PM(UTC)
mjock3

Rank: Member

Groups: Member
Joined: 9/16/2011(UTC)
Posts: 85
Location: Wisconsin

Thanks: 1 times
I bought an input for toslink, it has 2 jumpers and 2 resistors for the board. How do I determine what to put onto the board?

Thanks
Russ White  
#2 Posted : Monday, August 20, 2012 11:01:17 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
What will the TORX board be driving? Do you want TTL level or consumer level?
mjock3  
#3 Posted : Tuesday, August 21, 2012 1:53:52 PM(UTC)
mjock3

Rank: Member

Groups: Member
Joined: 9/16/2011(UTC)
Posts: 85
Location: Wisconsin

Thanks: 1 times
An output from a TV. So that would be consumer I think. Then going into 4-Channel S/PDIF (or AES-EBU) Level Converter Kit.

Edited by user Tuesday, August 21, 2012 1:55:38 PM(UTC)  | Reason: Not specified

Russ White  
#4 Posted : Tuesday, August 21, 2012 11:00:21 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Ok then you will want to use the resistors and wire them to the SPDIF4 as if it were a consumer level source.
luisbock  
#5 Posted : Wednesday, August 22, 2012 8:37:15 AM(UTC)
luisbock

Rank: Member

Groups: Member
Joined: 4/9/2011(UTC)
Posts: 37
Location: Lisbon

Thanks: 1 times
Can you tell the values of those resistors?
Regards
Russ White  
#6 Posted : Wednesday, August 22, 2012 12:13:50 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
They should be marked.
mjock3  
#7 Posted : Wednesday, August 22, 2012 2:45:45 PM(UTC)
mjock3

Rank: Member

Groups: Member
Joined: 9/16/2011(UTC)
Posts: 85
Location: Wisconsin

Thanks: 1 times
Thanks Russ, I just wanted to make sure. Unfortunately there is no data on that board.

Luisbock RS is a 270 ohm resistor and RP is 75 ohm.
luisbock  
#8 Posted : Thursday, August 23, 2012 11:40:57 AM(UTC)
luisbock

Rank: Member

Groups: Member
Joined: 4/9/2011(UTC)
Posts: 37
Location: Lisbon

Thanks: 1 times
Many thanks mjock3, my version is an older one (no switch or resistors) and was just remembering the voltage divider R values for consumer input. Not shure if i will add toslink, the diference between Spdif and I2S is very relevant, for my ears of course.
Regards
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (2)
Similar Topics
Toslink module available again? (General Questions)
by fernfrost 8/17/2020 4:18:42 PM(UTC)
Toslink module no lock (S/PDIF Transceiver (WM8804))
by Jordo 11/8/2018 9:36:40 PM(UTC)
Toslink issue or faulty DAC? (Buffalo DAC)
by mjroe 3/3/2018 10:53:52 AM(UTC)
Toslink Module - No Power (TOSLINK Module)
by tdmckellar 10/8/2017 5:07:36 PM(UTC)
Not sure about rifght configuration for a Toslink module (TOSLINK Module)
by dominique-tanguy 5/6/2016 3:16:13 PM(UTC)
Compatibility between TOSLINK module and OPUS or COD (COD DAC Module)
by androidtube 4/21/2016 12:15:36 PM(UTC)
TOSLINK module: no signal (TOSLINK Module)
by Adolvis 6/10/2015 5:37:39 PM(UTC)
Can Only Play 44.1khz from Toslink (TOSLINK Module)
by DQ828 3/15/2015 7:44:01 AM(UTC)
Toslink not working (TOSLINK Module)
by AlanH 1/30/2015 3:55:38 AM(UTC)
When are toslink modules available again (TOSLINK Module)
by solarstabi 12/6/2014 11:08:05 AM(UTC)
Powering Toslink (General Questions)
by AlanH 11/23/2014 9:18:50 AM(UTC)
Toslink module max rate... (TOSLINK Module)
by andreaevan 5/27/2014 3:51:06 PM(UTC)
2x toslink modules stopped working (TOSLINK Module)
by Crumboo 4/7/2014 5:42:53 PM(UTC)
Request advice on building toslink DAC linestage (General Questions)
by cootcraig 12/26/2013 7:09:46 PM(UTC)
Power Wiring Opus Dual-Mono DAC + S/PDIF Receiver Combo /Toslinkk (Opus DAC)
by Hironimo 11/26/2013 8:31:28 AM(UTC)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.