Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
mourip  
#1 Posted : Tuesday, December 15, 2009 6:58:40 PM(UTC)
mourip

Rank: Member

Groups: Member
Joined: 5/6/2009(UTC)
Posts: 27
Location: Washington, DC

Hi,

I wondered if I can wire up the SPDIF Receiver module to output SPDIF back to an external connector while also sending PCM on to the Metronome? Reading the manual it seems possible with the recommended default jumper settings. There is a header for SPDIF in and also out. Does the signal go into the receiver, get reclocked, and then back out or is this just a couple of pads connected to the input to allow the original signal to be "split" out?

Either way I would like to pass the signal out of the back of the chassis on to another device. If this works will there be any degradation?

Thanks,

Paul
mourip  
#2 Posted : Sunday, January 31, 2010 7:48:53 PM(UTC)
mourip

Rank: Member

Groups: Member
Joined: 5/6/2009(UTC)
Posts: 27
Location: Washington, DC

Any Thoughts?
Russ White  
#3 Posted : Sunday, January 31, 2010 9:38:15 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Is this the Wolfson receiver or the MUX?
mourip  
#4 Posted : Tuesday, February 2, 2010 11:36:39 AM(UTC)
mourip

Rank: Member

Groups: Member
Joined: 5/6/2009(UTC)
Posts: 27
Location: Washington, DC

This is the USB DAC/Receiver module based on the Texas Instruments PCM2707 USB DAC chip.

Thanks.
Brian Donegan  
#5 Posted : Tuesday, February 2, 2010 11:45:45 AM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
The USB module does not accept S/PDIF input. Are you sure you are not talking about the WM8804 S/PDIF Transceiver?

Edited by user Tuesday, February 2, 2010 11:46:22 AM(UTC)  | Reason: Not specified

mourip  
#6 Posted : Tuesday, February 2, 2010 11:52:34 AM(UTC)
mourip

Rank: Member

Groups: Member
Joined: 5/6/2009(UTC)
Posts: 27
Location: Washington, DC

Thanks for the reply.

What I want to do is take the PCM output and wire it to my OPUS (I am already doing this now) and at the same time take the SPDIF output and wire it to another outside connector in order to pass through the signal to another device.

In other words can the 2707 send two outputs (SPDIF and PCM) at the same time and not compromise either?

Best,

Paul
Brian Donegan  
#7 Posted : Tuesday, February 2, 2010 12:02:16 PM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
No, it can only output one or the other.
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (2)
Similar Topics
4:1 Mux TTL level SPDIF output (S/PDIF 4:1 MUX/Receiver)
by Martin_B 4/3/2015 8:45:51 PM(UTC)
I want to add SPDIF out to a digital piano (S/PDIF Transceiver (WM8804))
by Tapetech 8/2/2014 5:19:42 AM(UTC)
SPDIF output from WM8804 (S/PDIF Transceiver (WM8804))
by Abuela 7/17/2012 1:45:37 PM(UTC)
No Spdif output from Usb receiver. (USB Receiver/DAC)
by Erlend Sæterdal 3/8/2012 5:33:21 AM(UTC)
PCM IN/SPDIF OUT Transceiver configuraration (S/PDIF Transceiver (WM8804))
by Jon Espley 3/2/2011 6:22:05 AM(UTC)
SPDIF Output Issue (S/PDIF 4:1 MUX/Receiver)
by amr 1/1/2011 12:34:14 PM(UTC)
Spdif output help (S/PDIF Transceiver (WM8804))
by yiancar1 8/1/2010 9:08:59 AM(UTC)
No lock when connecting the 4:1 MUX (SPDIF out) to B32S via GND and D1 (Buffalo DAC)
by NicMac 7/1/2009 2:11:29 PM(UTC)
Motherboard SPDIF out (Buffalo DAC)
by christensenleif@msn.com 6/3/2009 12:56:14 AM(UTC)
spdif output wiring (USB Receiver/DAC)
by oneplustwo 5/25/2009 9:07:50 AM(UTC)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.