Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
Erlend Sæterdal  
#1 Posted : 13 years ago
Erlend Sæterdal

Rank: Member

Groups: Member
Joined: 7/27/2008(UTC)
Posts: 158



I need more information on this . Whistle
LeonvB  
#2 Posted : 13 years ago
LeonvB

Rank: Member

Groups: Member
Joined: 5/23/2010(UTC)
Posts: 708
Location: Netherlands

Thanks: 2 times
Was thanked: 48 time(s) in 45 post(s)
Like?
Erlend Sæterdal  
#3 Posted : 13 years ago
Erlend Sæterdal

Rank: Member

Groups: Member
Joined: 7/27/2008(UTC)
Posts: 158



I will order and see if I can work it out. Terminals , connexions etc. I will use a switch on the frontplate. Also it would have been nice with a regulator on the board.

What is the size off the board ? Brick wall d'oh!
LeonvB  
#4 Posted : 13 years ago
LeonvB

Rank: Member

Groups: Member
Joined: 5/23/2010(UTC)
Posts: 708
Location: Netherlands

Thanks: 2 times
Was thanked: 48 time(s) in 45 post(s)
Originally Posted by: Erlend Sæterdal Go to Quoted Post

What is the size off the board ? Brick wall d'oh!

If that is the question, you likely haven't read page 20 and 47 of the integration guide (revision 1.2.6). I would suggest taking a look. ;)
Erlend Sæterdal  
#5 Posted : 13 years ago
Erlend Sæterdal

Rank: Member

Groups: Member
Joined: 7/27/2008(UTC)
Posts: 158

Originally Posted by: LeonvB Go to Quoted Post
Originally Posted by: Erlend Sæterdal Go to Quoted Post

What is the size off the board ? Brick wall d'oh!

If that is the question, you likely haven't read page 20 and 47 of the integration guide (revision 1.2.6). I would suggest taking a look. ;)


Sorry then ! Drool Nice document and nice it is smaller then the first Otto.

Edited by user 13 years ago  | Reason: Not specified

kkerwin  
#6 Posted : 12 years ago
kkerwin

Rank: Member

Groups: Member
Joined: 10/5/2012(UTC)
Posts: 1
United States
Location: st. louis missouri

Thanks: 1 times
where will i find the integration guide?
thanks
k
Brian Donegan  
#7 Posted : 12 years ago
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
Originally Posted by: kkerwin Go to Quoted Post
where will i find the integration guide?
thanks
k


Buffalo page, or the Documents section.
thanks 1 user thanked Brian Donegan for this useful post.
kkerwin on 11/19/2012(UTC)
Erlend Sæterdal  
#8 Posted : 12 years ago
Erlend Sæterdal

Rank: Member

Groups: Member
Joined: 7/27/2008(UTC)
Posts: 158


My Otto do not work I connected input to B1 and B2 and output to 1 A .
Erlend Sæterdal  
#9 Posted : 12 years ago
Erlend Sæterdal

Rank: Member

Groups: Member
Joined: 7/27/2008(UTC)
Posts: 158


Hi do you think my OTTO II is dead ? I connected the S direct to VCC without the 10 kohm resistor ?
Russ White  
#10 Posted : 12 years ago
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Doing that alone should not kill it - as long as it was not higher than VCC.

You can easily check the OTTO-II. Just completely disconnect the signals, then use a AA battery and make sure the voltage at the input is present at the output as appropriate.
Erlend Sæterdal  
#11 Posted : 12 years ago
Erlend Sæterdal

Rank: Member

Groups: Member
Joined: 7/27/2008(UTC)
Posts: 158


Thank you I will try that . Anyway I ordered anotherone to be sure :). There is no signal trough the Otto II.
Russ White  
#12 Posted : 12 years ago
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Did you have VCC connected to 3-5V?
Erlend Sæterdal  
#13 Posted : 12 years ago
Erlend Sæterdal

Rank: Member

Groups: Member
Joined: 7/27/2008(UTC)
Posts: 158



Yes 5 v from 7805 .
Brian Donegan  
#14 Posted : 12 years ago
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
Do you have the signal grounds connected? It won't work without them.
Erlend Sæterdal  
#15 Posted : 12 years ago
Erlend Sæterdal

Rank: Member

Groups: Member
Joined: 7/27/2008(UTC)
Posts: 158


Yes I have . I use 1 B 1 and 1 B 2 for inputs and 1 A for output.
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (2)
Similar Topics
A few questions about OTTO II (OTTO 2:1 Switch)
by Mullet 7 years ago
4:1 Mux/Demux or Otto II and 4:1 Mux/Receiver BIIIse dual mono (OTTO 2:1 Switch)
by branko 9 years ago
Otto II doesn't switch... (OTTO 2:1 Switch)
by luca72c 10 years ago
Two questions about Otto II (OTTO 2:1 Switch)
by ed linssen 11 years ago
OTTO II - Chip Fault? (OTTO 2:1 Switch)
by RichG 11 years ago
OTTO II powerup issue? (OTTO 2:1 Switch)
by Dimdim 11 years ago
S/PDIF Transceiver/async USB-to-I2S -> OTTO II -> Metronome -> Opus Dual Differential (Opus DAC)
by groundloop 11 years ago
OTTO II & Microcontroller Issues (OTTO 2:1 Switch)
by SCompRacer 12 years ago
OTTO II documentation (OTTO 2:1 Switch)
by Cobra2 12 years ago
Influence on sound when using the Otto II (OTTO 2:1 Switch)
by Erlend Sæterdal 12 years ago
Otto II Dimensions (OTTO 2:1 Switch)
by adelias 12 years ago
Buf III & Otto II. No lock on 354 KHz files. (Buffalo DAC)
by Amaro 12 years ago
Noise when switching OTTO II (OTTO 2:1 Switch)
by sheya 13 years ago
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.