Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
TimmyMac  
#1 Posted : Tuesday, April 14, 2009 10:00:07 PM(UTC)
TimmyMac

Rank: Member

Groups: Member
Joined: 3/29/2009(UTC)
Posts: 7
Location: Guelph, ON

Having some trouble with my COD+IVY setup. The Metronome which is the source for them is tested and working good with my Opus module, but when I try the COD+IVY I get normal output on the right channel, but about 1.5V DC offset on the left channel output (of the IVY). If I remove the positive left channel signal wire from the COD to the IVY I get no DC offset. With only that wire installed (and not the GND or negative channel) I get 1.5V. The offset is in both positive and negative outputs. Any ideas?
Russ White  
#2 Posted : Wednesday, April 15, 2009 12:50:35 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Hi Timmy, will need a lot more information.

This likely has nothing to do with the metronome, but only the COD and IVY.

Pictures would help a lot.

Also double check your wiring and the IVY configuration.

Cheers!
Russ
TimmyMac  
#3 Posted : Saturday, April 18, 2009 10:31:08 PM(UTC)
TimmyMac

Rank: Member

Groups: Member
Joined: 3/29/2009(UTC)
Posts: 7
Location: Guelph, ON

IVY checks out fine - by switching the input channels I could get each channel of the IVY to work properly by itself. It's only the left channel of the COD that's not working right. The metronome is working fine - it's configured for 96khz output and works great with my opus. I'm going to pull the COD PCB and double check everything to make sure the joints are all ok, then I'll see if I can get some pictures for you if nothing turns up.

For now, the switch positions are:
MONO 0
CHSL 0
FMT0 0
FMT1 0

DEM MUTE RST all open (nothing attached to the pins on the board).

Edited by user Saturday, April 18, 2009 10:32:11 PM(UTC)  | Reason: Not specified

TimmyMac  
#4 Posted : Monday, April 20, 2009 1:29:13 PM(UTC)
TimmyMac

Rank: Member

Groups: Member
Joined: 3/29/2009(UTC)
Posts: 7
Location: Guelph, ON

Got it - a pass over everything with the soldering iron and rewiring the boards as I put it back together fixed whatever the problem was, so it must have just been an assembly error on my part. Thanks.

BTW, this beats the pants off the Opus (without ivy) as far as I'm concerned!
Russ White  
#5 Posted : Monday, April 20, 2009 4:40:17 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Good Job Timmy. :) It always feels good to get a problem solved.

I too very very much like COD + IVY. I Was just remarking to Brian that it is a very much underrated DAC combo.

Cheers!
Russ
Rss Feed  Atom Feed
Users browsing this topic
GuestUser
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.