Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
aaron.luebke  
#1 Posted : Thursday, March 14, 2019 8:41:03 PM(UTC)
aaron.luebke

Rank: Member

Groups: Member
Joined: 3/14/2019(UTC)
Posts: 1
United States
Location: Illinois

I picked up a BIII build from a friend and it's working fine but I'm going to change it up a bit and go to a USB only input. So I'm definitely not very well versed in this product but I am adept at slinging solder and changing wires around.

Before changing this around I checked the voltages and found that the LCDPS right side output (as viewing from the output in front of me, inputs to the back) has no voltage and then noticed that R4 and R3 are just jumpered. I have adjustable 5v on the other side. Both inputs are measuring around 11v from a 9v transformer. R1 and R2 are 10 ohm, 3 watt.

If this is normal I'm good with it but I can't find anything to tell me if there is an issue here. I just don't want to start the changes I'm planning and then find out I should have fixed something first.

Thanks,
Aaron
Rss Feed  Atom Feed
Users browsing this topic
GuestUser
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.