Twisted Pear Audio Support
»
Product Support
»
General Questions
»
Powering the IVY III and another question regarding sheilding
Rank: Member
Groups: Member
Joined: 2/8/2015(UTC) Posts: 3 Location: Georgia
|
Hello - The IVY III has three DC inputs, Left, Right and Center. I looked at the schematic and it's not clear to me which to use when powering from a Placid HD BP.
Another question: My Ivy board is about three inches from the power supply. Would it be beneficial to have shielding between the IVYIII and Power supplies?
Thank - you,
RD
|
|
|
|
Rank: Member
Groups: Member
Joined: 1/6/2012(UTC) Posts: 305 Location: Plainfield, IL
Thanks: 11 times Was thanked: 26 time(s) in 21 post(s)
|
If you install jumpers J1-J4, you can power your IVY III from any of the three locations. The jumper option is for those who wish to power the I/V board with multiple power supplies. On my dual mono build, I power left channel of my Legato with one PS (J1 and J2 removed) and the right/middle section of board with another PS (J3 and J4 installed). In this build I connected power to the left DC input on a Legato (J1-J4 jumpers installed). I didn't have any noise issues with this build (no shielding), and power supplies are within 3 inches of DAC, I/V and input board. I like to keep the transformers as far away as possible from DAC and I/V board. Edited by user Monday, February 16, 2015 6:26:46 AM(UTC)
| Reason: Not specified |
|
|
|
|
Rank: Member
Groups: Member
Joined: 2/8/2015(UTC) Posts: 3 Location: Georgia
|
|
|
|
|
Twisted Pear Audio Support
»
Product Support
»
General Questions
»
Powering the IVY III and another question regarding sheilding
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.