Rank: Member
Groups: Member
Joined: 9/14/2014(UTC) Posts: 4  Location: copenhagen
|
Hi
It seems that the buffaloIIIse is a real nice solution for my dac project.
In the setup I would like to use it with Amanore usb and a tube output stage (ex. lampizator).
I have some questions and hope you can help....
1. Will it Work fully DSD256/512 with Amanero (in Windows pc)?
2. How do I connect a LCD/LED info dislpay?
3. Can I, more or less, use a tube output stage instead of Ivy/Legato?
4. It the es9018 larest revision?
5. Does es9018 run as voltage or current output?
Pls forgive if some answers already is in the manual.
Regards baek47
|
|
|
|
|
|
Rank: Administration
Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA
Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
|
1. Yes.
2. That would be a separate project, but the Buffalo has an I2C interface you can connect to for control of the DAC.
3. Yes.
4. Yes.
5. It depends on the input impedance of your output stage. Into near-zero ohms (such as IVY or Legato), the ES9018 will act as a current source. Into a higher impedance, it will act as a voltage source (transformers, typical tube output stages).
|
|
|
|
|
|
Rank: Member
Groups: Member
Joined: 9/14/2014(UTC) Posts: 4 Location: copenhagen
|
Hi Brian
Thx for fast sunday answer
I see that BuffulaIIIse isnt in stock till october
Can the The Buffalo III 8-Channel DAC do same same setup for me with stereo single ended?
Regards Torben
|
|
|
|
|
|
Rank: Member
Groups: Member
Joined: 5/23/2010(UTC)
Posts: 708
Location: Netherlands
Thanks: 2 times
Was thanked: 48 time(s) in 45 post(s)
|
Yes, but it'll take a little more work: you'll need to combine the outputs yourself.
|
|
|
|
|
|
Rank: Member
Groups: Member
Joined: 9/14/2014(UTC) Posts: 4 Location: copenhagen
|
Thx Brian
I have already ordered
The best from Torben
|
|
|
|
|
|
Rank: Administration
Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA
Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
|
Quote:Can the The Buffalo III 8-Channel DAC do same same setup for me with stereo single ended? What do you mean by "single-ended"? The outputs of both DACs are differential, and should feed a balanced output stage to benefit from common-mode cancellation of noise. Without this, you will have seriously degraded performance.
|
|
|
|
|
|
Rank: Member
Groups: Member
Joined: 9/14/2014(UTC) Posts: 4 Location: copenhagen
|
Hi Brian
I meant just normal stereo output, unbalanced.
...or rather, it should feed my tube output stage, which is stereo unbalanced.
Regards Torben
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
