Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login
Schematic Question
Options
View
Go to last post Go to first unread
Previous Topic Next Topic
lehmanhill  
#1 Posted : Tuesday, April 3, 2012 4:16:44 PM(UTC)
lehmanhill

Rank: Member

Groups: Member
Joined: 4/1/2012(UTC)
Posts: 7
Location: Chelsea, Mi. USA
Just checking. Most of the connections in the schematic are made by lines, but a few are implied. Can you confirm that the DSD input terminals connect inside the board to the pins list on the right of the connection (that is, from top to bottom, OSR, BCLK, LRCLK, and board ground)?Anxious

Also, can you clarify a conflict on the controller inputs. In the schematic, it appears that controller 4 connects to pin 23 (IWO/DOUT). In the board photo, the controller input for controller 4 is pin 28 (CSB). From what I have seen on the Wolfson datasheets, CSB is the correct connection to have available for a 3 wire serial controller. Can you confirm controller header access to CSB?

Sorry to be picky like this. I getting close to giving software control of an Opus a try, so I'm sweating the details.

Thanks in advance.

Jac
Back to top

Wanna join the discussion?! Login to your Twisted Pear Audio Support forum accountor Register a new forum account.
Back to top  
Russ White  
#2 Posted : Tuesday, April 3, 2012 4:38:08 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Which version of Opus?
Back to top
WWW
lehmanhill  
#3 Posted : Tuesday, April 3, 2012 4:47:01 PM(UTC)
lehmanhill

Rank: Member

Groups: Member
Joined: 4/1/2012(UTC)
Posts: 7
Location: Chelsea, Mi. USA
I haven't purchased it yet, so I guess we are talking v2.0 for the WM8741.
Back to top
Russ White  
#4 Posted : Tuesday, April 3, 2012 5:01:31 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Yes the controller header has a connection to CSB and it is labeled. :)

I personally prefer the 2-wire (I2C compatible) mode of control, but I think you can use either one. It is just that I have only ever used I2C with the WM8741.
Back to top
WWW
Russ White  
#5 Posted : Tuesday, April 3, 2012 5:02:00 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Latest version is actually 2.1
Back to top
WWW
lehmanhill  
#6 Posted : Tuesday, April 3, 2012 5:09:46 PM(UTC)
lehmanhill

Rank: Member

Groups: Member
Joined: 4/1/2012(UTC)
Posts: 7
Location: Chelsea, Mi. USA
Thanks Russ. Can you confirm the DSD header connections to the chip?

Jac
Back to top
lehmanhill  
#7 Posted : Tuesday, April 3, 2012 5:26:23 PM(UTC)
lehmanhill

Rank: Member

Groups: Member
Joined: 4/1/2012(UTC)
Posts: 7
Location: Chelsea, Mi. USA
Just in case your curious, my project is to upgrade the DAC on an old Sony SACD, so I need to get at the DSD stream.
Back to top
Rss Feed  Atom Feed
Users browsing this topic
GuestUser
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Youtube
Copyright © Twisted Pear Audio