Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
Shaman  
#1 Posted : Thursday, September 24, 2009 8:28:33 AM(UTC)
Shaman

Rank: Advanced Member

Groups: Member
Joined: 1/11/2009(UTC)
Posts: 70
Location: Greece

Hi guys,

Will it be possible to share the secondaries of a single transformer between two Placid BPs?
To be more specific, I'm planning to power my 32S using a single Placid for VD and two Placid BPs for the IVY IIs.
Since I only have one 2x18V 50VA transformer for the I/V section I was hoping I could use terminal blocks:

UserPostedImage

..to split the secondaries between the two Placids (aka have one of the transformer's secondaries power both +15V sections of the two BP supplies and the other secondary to power the -15V sections of the BPs).

Is there something in the design of the BP Placids that would prevent this from working?

Also (to hijack my own thread :p ) could you share with me the value of the Rs required to get fixed +-15V output?

Edited by user Thursday, September 24, 2009 8:39:05 AM(UTC)  | Reason: Not specified

Russ White  
#2 Posted : Thursday, September 24, 2009 6:53:16 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Yes you can use a single dual secondary transformer as you described for two Placid BP.

With the stock 2K feedback Resistor (R10 and R14) using 750R for R3 and R4 should get you fairly close to 15V. Each rail will be slightly different, this normal, and perfectly fine.

The reference voltage should be ~4V (mine is 4.05V)

So to calculate the output voltage the formula is Vout = VRef * (1 + (RF / RG))

Where RF is R10/14 and RG is R3/4.

Cheers!
Russ
Shaman  
#3 Posted : Friday, September 25, 2009 12:52:01 AM(UTC)
Shaman

Rank: Advanced Member

Groups: Member
Joined: 1/11/2009(UTC)
Posts: 70
Location: Greece

Thanks a lot Russ! :)

I'll buy some 732R and some 750R ones, as well as 8K ones for the 5V Placid.
I suppose 1/4W resistors should be enough for this?

As for current settings I think it's wise to use the trimmer at first so I won't bother you with that (yet).. :p

Edited by user Friday, September 25, 2009 4:59:06 AM(UTC)  | Reason: Not specified

Shaman  
#4 Posted : Friday, September 25, 2009 12:57:30 PM(UTC)
Shaman

Rank: Advanced Member

Groups: Member
Joined: 1/11/2009(UTC)
Posts: 70
Location: Greece

So, are those resistors 1/4W ? Whistle
Russ White  
#5 Posted : Friday, September 25, 2009 7:13:20 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Yes 1/4W. :)
Shaman  
#6 Posted : Saturday, September 26, 2009 1:35:55 AM(UTC)
Shaman

Rank: Advanced Member

Groups: Member
Joined: 1/11/2009(UTC)
Posts: 70
Location: Greece

Great, thanks!
I see the Placid page is up now with BOMs and everything.
Good stuff. :d/

Edited by user Saturday, September 26, 2009 1:44:39 AM(UTC)  | Reason: Not specified

Rss Feed  Atom Feed
Users browsing this topic
GuestUser (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.