Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
tdmckellar  
#1 Posted : Sunday, October 8, 2017 5:07:36 PM(UTC)
tdmckellar

Rank: Member

Groups: Member
Joined: 10/28/2016(UTC)
Posts: 32
United Kingdom
Location: England

Thanks: 7 times
Was thanked: 3 time(s) in 3 post(s)
I have a Toslink module which I have connected to 5.25V and GND, however, the module is not lighting up red as you would expect to indicate it is powered. I have looked through the other posts and read about checking the voltage regulator pin nearest to the edge of the board to check I am getting 3.3V, which I am.

Does that mean the issue is with the TORX module?

Thanks
Brian Donegan  
#2 Posted : Sunday, October 8, 2017 8:24:55 PM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
There will be no light, because it is a TORX receiver, not a transmitter.

Have you tried to use the output?
tdmckellar  
#3 Posted : Sunday, October 8, 2017 9:18:29 PM(UTC)
tdmckellar

Rank: Member

Groups: Member
Joined: 10/28/2016(UTC)
Posts: 32
United Kingdom
Location: England

Thanks: 7 times
Was thanked: 3 time(s) in 3 post(s)
Thank you for your reply.

My mistake, I have tried connecting an optical output to the module but I have not got a lock from the DAC. I have four SPDIF inputs connected to the SPDIF-4 input module, including a coaxial input I have also tested which also doesn't lock. I am using sidecar to switch between the SPDIF inputs and USB input, which I have got working. I am using an Arduino connected to trigger pin B, driven high (3.3v) for I2S or low for SPDIF.

The arduino is triggering the sidecar and the USB inputs are working but i cant seem to get the SPDIF inputs to work. I have installed the resistors on the board for consumer level (75ohm for R and 0ohm for RS). Can you advise what I can try to get it working?

Rss Feed  Atom Feed
Users browsing this topic
GuestUser (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.