Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
rallychief  
#1 Posted : Friday, October 7, 2016 11:10:57 AM(UTC)
rallychief

Rank: Member

Groups: Member
Joined: 10/7/2016(UTC)
Posts: 3
United Kingdom
Location: Plymouth

Hi everyone, I have a Buffalo 1 Dac, built in the USA, but then brought to uk, and transformers rewired for 220-240v, this was 3-4 years ago, recently the smaller of the 2 transformers has burnt out, unfortunately the label with the identity information has burnt, I need to know what it is, the other larger one is manufactured by Avel Linberg inc model Y236053 25 VA 50/60hz, any help in identifying the other tranny would be greatly appreciated.


Cheers Chris
avr300  
#2 Posted : Friday, October 7, 2016 4:56:33 PM(UTC)
avr300

Rank: Member

Groups: Member
Joined: 6/17/2008(UTC)
Posts: 921
Denmark

Thanks: 1 times
Was thanked: 70 time(s) in 69 post(s)
That must be the 9v tranny.

http://www.twistedpearau.../power/transformers.aspx


Take a good at look at the surviving tranny. Is that marked 15v?
rallychief  
#3 Posted : Friday, October 7, 2016 7:56:15 PM(UTC)
rallychief

Rank: Member

Groups: Member
Joined: 10/7/2016(UTC)
Posts: 3
United Kingdom
Location: Plymouth

Hi avr300, yes it is, the red and yellow output wires are both 15v .83 amp +, now i look at the dead one with a magnifying glass, the model no is no chance, but i can just make out, that red and yellow output wires are 9v .83 amp + fairly sure this one is only 15VA as well, it is physically quite a bit smaller than the 15v one.

Edit found Avel Linberg Y23 spec sheet on line, looks like i need a Y236001 ?

Cheers Chris

Edited by user Friday, October 7, 2016 8:07:03 PM(UTC)  | Reason: Not specified

avr300  
#4 Posted : Saturday, October 8, 2016 9:45:02 AM(UTC)
avr300

Rank: Member

Groups: Member
Joined: 6/17/2008(UTC)
Posts: 921
Denmark

Thanks: 1 times
Was thanked: 70 time(s) in 69 post(s)
Go for the Y236101.

Its' 30VA.

(of cause, the Y236001 will work, its identical to the one burned out)
rallychief  
#5 Posted : Saturday, October 8, 2016 10:47:17 AM(UTC)
rallychief

Rank: Member

Groups: Member
Joined: 10/7/2016(UTC)
Posts: 3
United Kingdom
Location: Plymouth

Thanks for that avr300, the only minor snag with fitting the 30VA is the physical size, the 2 trannys are quite close together, to fit a larger one would mean drilling another hole in the bottom case, not a huge issue, and something I would be willing to do, if I was to uprate both of them, ie replace the 25VA 15v one with the 50VA, and the 9v with the 30VA, would it improve the dac in any way, why were the later ones fitted with these, were the current demands higher ?


Cheers Chris
avr300  
#6 Posted : Saturday, October 8, 2016 2:46:53 PM(UTC)
avr300

Rank: Member

Groups: Member
Joined: 6/17/2008(UTC)
Posts: 921
Denmark

Thanks: 1 times
Was thanked: 70 time(s) in 69 post(s)
With the introduction of the B2 and later the B3 both with tridents local stunt regulators the demand for current increased. Using the linestage Legato did the same. And so did the use of the placid power supplies.
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (3)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.