Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
Chris91  
#1 Posted : Saturday, February 21, 2015 10:55:58 AM(UTC)
Chris91

Rank: Member

Groups: Member
Joined: 2/21/2015(UTC)
Posts: 3
Germany

Thanks: 1 times
Hi,

i have a problem with a DC-Offset on the left channel output. I have two complete identical IVY III + COD (for two active speakers). Both setups show the same behavior (about 13mV offset on the left channel, 1-2mV offset on the right channel).

Is there a chance to null the dc-offset without output caps ?

I use a class D amplifier (Anaview AMS-1000) who don't like any dc-offset on the input.(1-2mv will be ok)


Cheers

Christian
Brian Donegan  
#2 Posted : Saturday, February 21, 2015 5:09:08 PM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
Even 13mV is negligible, and will not cause any problems. That is a quite low value.
Chris91  
#3 Posted : Saturday, February 21, 2015 5:16:17 PM(UTC)
Chris91

Rank: Member

Groups: Member
Joined: 2/21/2015(UTC)
Posts: 3
Germany

Thanks: 1 times
Thanks for the quick reply !

The Problem is, that the class D amp stutter with this little offset (the other channel runs perfect with the 1-2mV).


Brian Donegan  
#4 Posted : Saturday, February 21, 2015 9:20:12 PM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
I think in this case you will need to add caps then.
thanks 1 user thanked Brian Donegan for this useful post.
Chris91 on 2/22/2015(UTC)
Chris91  
#5 Posted : Sunday, February 22, 2015 5:00:35 PM(UTC)
Chris91

Rank: Member

Groups: Member
Joined: 2/21/2015(UTC)
Posts: 3
Germany

Thanks: 1 times
Ok Thanks !

The Anaview class D amp has a low input impedance (about 1,4 KOhm) so i need the very low output impedance from the ivy stage ... is there a problem when I add the caps between the ivy and the amp (I calculate 8,2µF.. ) ?

Or is the better solution to add the caps (unkown values) between the I/V and IC2 (after R9 / R10) ?

Russ White  
#6 Posted : Sunday, February 22, 2015 8:57:38 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
I would go for 20-47uf right at the output of the IVY-III
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (3)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.