Buffalo lllse help needed Options  Watch this topic  Print this topic  Atom Feed  RSS Feed View » Normal Threaded

Previous Topic Next Topic

mk61		#1 Posted : Tuesday, July 15, 2014 2:16:30 PM(UTC)
Rank: Member Groups: Member Joined: 7/15/2014(UTC) Posts: 6		I have no lock for spdif connected direct to board at spdif and ground, pretty simple but no lock. I do have one diode not lit on trident shunt reg. All voltages are correct on all tridents, tried several different shunt regs from other working Blll's with same result.
User Profile View All Posts by User View Thanks

	Wanna join the discussion?! Login to your Twisted Pear Audio Support forum accountor Register a new forum account.

avr300		#2 Posted : Tuesday, July 15, 2014 7:59:03 PM(UTC)
Rank: Member Groups: Member Joined: 6/17/2008(UTC) Posts: 921 Thanks: 1 times Was thanked: 70 time(s) in 69 post(s)		Check for correct Trident placement. Remember, you have one 1.2v and two 3.3v. All LEDs should be lit.
User Profile View All Posts by User View Thanks

mk61		#3 Posted : Friday, July 18, 2014 10:15:31 PM(UTC)
Rank: Member Groups: Member Joined: 7/15/2014(UTC) Posts: 6		Tridents are correct and I now have all led's lit ( it was low voltage) but I still have no lock and source has been verified.
User Profile View All Posts by User View Thanks

mk61		#4 Posted : Sunday, July 20, 2014 3:18:43 PM(UTC)
Rank: Member Groups: Member Joined: 7/15/2014(UTC) Posts: 6		is it necessary to have the output stage connected to get a lock??
User Profile View All Posts by User View Thanks

LeonvB		#5 Posted : Sunday, July 20, 2014 4:35:45 PM(UTC)
Rank: Member Groups: Member Joined: 5/23/2010(UTC) Posts: 708 Location: Netherlands Thanks: 2 times Was thanked: 48 time(s) in 45 post(s)		No. Do you have pictures of the setup?
User Profile View All Posts by User View Thanks

mk61		#6 Posted : Tuesday, July 22, 2014 2:57:24 AM(UTC)
Rank: Member Groups: Member Joined: 7/15/2014(UTC) Posts: 6		I will try and post some pic's the layout is quite simple I have 5.2 volts and 350ma at Vin all trident voltages are spot on and a working dig source connected to spdif in and ground directly to the board. but no lock am I missing something?? is there any specific points that need jumpers or sw on off's I'am not seeing???
User Profile View All Posts by User View Thanks

Brian Donegan		#7 Posted : Tuesday, July 22, 2014 3:51:59 PM(UTC)
Rank: Administration Groups: Administration, Customer Joined: 10/24/2006(UTC) Posts: 2,868 Location: Massachusetts, USA Thanks: 2 times Was thanked: 141 time(s) in 134 post(s)		How much current are you shunting on the Placid?
		WWW
User Profile View All Posts by User View Thanks

LeonvB		#8 Posted : Tuesday, July 22, 2014 5:02:17 PM(UTC)
Rank: Member Groups: Member Joined: 5/23/2010(UTC) Posts: 708 Location: Netherlands Thanks: 2 times Was thanked: 48 time(s) in 45 post(s)		Originally Posted by: mk61 I will try and post some pic's the layout is quite simple I have 5.2 volts and 350ma at Vin all trident voltages are spot on and a working dig source connected to spdif in and ground directly to the board. but no lock am I missing something?? is there any specific points that need jumpers or sw on off's I'am not seeing??? 350mA CSS sounds too low. As Brian asks: how much current are you shunting on the Placid?
User Profile View All Posts by User View Thanks

mk61		#9 Posted : Tuesday, July 22, 2014 9:34:41 PM(UTC)
Rank: Member Groups: Member Joined: 7/15/2014(UTC) Posts: 6		I remeasured both and have .620 current and 14mv shunt
User Profile View All Posts by User View Thanks

Brian Donegan		#10 Posted : Tuesday, July 22, 2014 9:42:15 PM(UTC)
Rank: Administration Groups: Administration, Customer Joined: 10/24/2006(UTC) Posts: 2,868 Location: Massachusetts, USA Thanks: 2 times Was thanked: 141 time(s) in 134 post(s)		Increase the shunt to at least 50mA.
		WWW
User Profile View All Posts by User View Thanks

Rss Feed  Atom Feed

Users browsing this topic

GuestUser (6)