Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
sbelyo  
#1 Posted : Sunday, March 30, 2014 6:25:11 PM(UTC)
sbelyo

Rank: Member

Groups: Member
Joined: 11/13/2008(UTC)
Posts: 36
Location: NJ

I'm finally assembling my Buffalo 24. I need to know how much current the VD(digital supply) 5-15 VDC. (6VDC recommended) and the VA(analog supply) 6-12VDC (6.6 VDC recommended) will draw.

I have two Placid supplies for this purpose and I just want to set them up properly.

Thanks
avr300  
#2 Posted : Sunday, March 30, 2014 6:58:29 PM(UTC)
avr300

Rank: Member

Groups: Member
Joined: 6/17/2008(UTC)
Posts: 921
Denmark

Thanks: 1 times
Was thanked: 70 time(s) in 69 post(s)
Seriously ? Buffalo24. That's an old lady.

VA is next to nothing. Initial try 100mA
VD is somewhat more. Initial try 300mA.

It's pretty easy to test, as long as you knows how the shunt supply works.

Voltage sags - not shunting enough current.
Too hot - you're shunting to much current.

Always check with a DMM, both cold and warm.

(if you insists, I can take apart one of my retired B24 and do the measurement)
sbelyo  
#3 Posted : Sunday, March 30, 2014 7:23:28 PM(UTC)
sbelyo

Rank: Member

Groups: Member
Joined: 11/13/2008(UTC)
Posts: 36
Location: NJ

Yeah... I had the module for years. I took a break from diy for a few years. I figured it's better than the dac stage in my music hall cdp. Plus it has balanced outputs and that's the direction I want to go in.

I'll go with those settings, they seem logical
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (3)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.