Twisted Pear Audio Support
»
Product Support
»
Digital
»
Buffalo DAC
»
Buffalo 24 with two placid PSU how much current for VA and VD?
Rank: Member
Groups: Member
Joined: 11/13/2008(UTC) Posts: 36 Location: NJ
|
I'm finally assembling my Buffalo 24. I need to know how much current the VD(digital supply) 5-15 VDC. (6VDC recommended) and the VA(analog supply) 6-12VDC (6.6 VDC recommended) will draw.
I have two Placid supplies for this purpose and I just want to set them up properly.
Thanks
|
|
|
|
Rank: Member
Groups: Member
Joined: 6/17/2008(UTC) Posts: 921 Thanks: 1 times Was thanked: 70 time(s) in 69 post(s)
|
Seriously ? Buffalo24. That's an old lady.
VA is next to nothing. Initial try 100mA VD is somewhat more. Initial try 300mA.
It's pretty easy to test, as long as you knows how the shunt supply works.
Voltage sags - not shunting enough current. Too hot - you're shunting to much current.
Always check with a DMM, both cold and warm.
(if you insists, I can take apart one of my retired B24 and do the measurement)
|
|
|
|
Rank: Member
Groups: Member
Joined: 11/13/2008(UTC) Posts: 36 Location: NJ
|
Yeah... I had the module for years. I took a break from diy for a few years. I figured it's better than the dac stage in my music hall cdp. Plus it has balanced outputs and that's the direction I want to go in.
I'll go with those settings, they seem logical
|
|
|
|
Twisted Pear Audio Support
»
Product Support
»
Digital
»
Buffalo DAC
»
Buffalo 24 with two placid PSU how much current for VA and VD?
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.