Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
Ichiban  
#1 Posted : Thursday, January 22, 2009 5:59:34 PM(UTC)
Ichiban

Rank: Advanced Member

Groups: Member
Joined: 6/14/2007(UTC)
Posts: 30
Location: WesternNewYork

While listening to a cd via the Buffalo w/volumite the volumn decreased and
I went to turn it up with no result then the sound went to shhhhh (sea-
sound). Turned the dac unit off. That was four hours ago. Have turned it back on and so far, ten minutes, is ok.

Any thoughts?

ps Have been using the volumite since November without a problem.
Russ White  
#2 Posted : Thursday, January 22, 2009 7:19:36 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Hi, My only guess is that something caused either or both microntrollers (there is one on the buffalo and one on the volumite) to reset.

Possibly even the buffalo itself reset. This is most likely because if you are using SPDIF input and the buffalo reset without the PIC resetting you would get static because the default mode for the chip is I2S.

When you cycled the power things probably went back to normal.

I can only guess.

Cheers!
Russ

Edited by user Thursday, January 22, 2009 7:21:52 PM(UTC)  | Reason: Not specified

Ichiban  
#3 Posted : Thursday, January 22, 2009 8:36:00 PM(UTC)
Ichiban

Rank: Advanced Member

Groups: Member
Joined: 6/14/2007(UTC)
Posts: 30
Location: WesternNewYork

Actually, I'm using I2S input to the Buffalo from the "S/PDIF Receiver" board.

Thanks for the reply, if/when this occurs again I will try powering off to reset. Seems odd that it occurred while music had been playing for some time.
At first I thought it was the TXO amp starting to act up again like it had
been before your suggestion to increase the feedback cap to 330 pf.

Cheers
Ichiban  
#4 Posted : Sunday, January 25, 2009 12:03:38 PM(UTC)
Ichiban

Rank: Advanced Member

Groups: Member
Joined: 6/14/2007(UTC)
Posts: 30
Location: WesternNewYork

Ok, yesterday the Buff/volumite combo has no
adjustment. It outputs full vol. only. Re-powered
the dac unit same thing. [Brick wall]
I had the dac outputted into my preamp, thankfully,
so the power amp did not get a full blast!
I have not done any checks yet. Don't know what
I'd be looking for?
Brian Donegan  
#5 Posted : Sunday, January 25, 2009 5:56:36 PM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
How are you powering the Volumite, and is the voltage regulator installed on it?
Ichiban  
#6 Posted : Sunday, January 25, 2009 6:43:18 PM(UTC)
Ichiban

Rank: Advanced Member

Groups: Member
Joined: 6/14/2007(UTC)
Posts: 30
Location: WesternNewYork

d'oh!
Opened up the bottom of the dac box,
which I should have done to begin with, and
found one of the three wires from vol. to
Buffalo had sprung off.

I had just tack wired
it originally and meant to go back, if everything
was ok, and use a smaller wire thru the holes.

Thank you for the replies and sorry for the inconvenience.
Ichiban attached the following image(s):
100_1674_Small.JPG (81kb) downloaded 180 time(s).

You cannot view/download attachments. Try to login or register.
Russ White  
#7 Posted : Sunday, January 25, 2009 8:55:18 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
That would do it. :) No worries, it happens to us all.

Cheers!
Russ
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (4)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.