Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login
Problems With my BII - Clicks and distortion on the output.
Options
View
Go to last post Go to first unread
Previous Topic Next Topic
guglielmope  
#1 Posted : Saturday, February 2, 2013 5:17:17 PM(UTC)
guglielmope

Rank: Member

Groups: Member
Joined: 2/2/2013(UTC)
Posts: 4
Italy
Location: udine
Hello
I've a buoght a Buffalo II with 100Mhz without any modification and Placid PSU.
It's second hand but I soldered the connectors and used it for the first time.
I've the same problem with S/Pidif and I2S: 44Khz about ok(very little distortion like saturation), 96Khz some distortion and clicks, 192Khz a lot of noise and distortion.
The leds of AVC don't light every time the same.
I use as transport an SD Trans 192 Ver.3.0
I've also a ES9023 I2S dac and it works perfect.
Do you have any suggestion?
Thanks a lot
Guglielmo
Italy
Back to top

Wanna join the discussion?! Login to your Twisted Pear Audio Support forum accountor Register a new forum account.
Back to top  
LeonvB  
#2 Posted : Saturday, February 2, 2013 10:22:35 PM(UTC)
LeonvB

Rank: Member

Groups: Member
Joined: 5/23/2010(UTC)
Posts: 708
Location: Netherlands

Thanks: 2 times
Was thanked: 48 time(s) in 45 post(s)
Have you checked the shunt current of the Placid?
Back to top
guglielmope  
#3 Posted : Saturday, February 2, 2013 10:56:37 PM(UTC)
guglielmope

Rank: Member

Groups: Member
Joined: 2/2/2013(UTC)
Posts: 4
Italy
Location: udine
I checked when I built it, but tomorroy I'll verify the current again.
Thanks
Guglielmo
Back to top
guglielmope  
#4 Posted : Sunday, February 3, 2013 10:39:47 PM(UTC)
guglielmope

Rank: Member

Groups: Member
Joined: 2/2/2013(UTC)
Posts: 4
Italy
Location: udine
Hello,
I measured 260mA and not 350mA as indicated in the manual of the Placid.
Now is too late, but tomorrow I'll trim at 350mA. And I'll made nw tests.
Thanks a lot for the moment.
Ciao Gugleimo
Back to top
guglielmope  
#5 Posted : Monday, February 4, 2013 10:27:08 PM(UTC)
guglielmope

Rank: Member

Groups: Member
Joined: 2/2/2013(UTC)
Posts: 4
Italy
Location: udine
Hello,
With 350mA everything seems OK.
Thanks a lot for your help.
Now I've only to verify the groud connection to eleminate a bit of hum.
There is any circuit drawing on the net?
For the moment I'm using the the board dirctely as voltage output.
Grazie
Guglielmo
Back to top
LeonvB  
#6 Posted : Tuesday, February 5, 2013 6:05:15 PM(UTC)
LeonvB

Rank: Member

Groups: Member
Joined: 5/23/2010(UTC)
Posts: 708
Location: Netherlands

Thanks: 2 times
Was thanked: 48 time(s) in 45 post(s)
There is a circuit diagram of the Placid, but not for the BII.
Back to top
Russ White  
#7 Posted : Tuesday, February 5, 2013 8:01:15 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Any hum would be cause from something external to both modules. :)

It would be a wiring/routing issue.
Back to top
WWW
Rss Feed  Atom Feed
Users browsing this topic
GuestUser
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Youtube
Copyright © Twisted Pear Audio