Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login
Placid HD BP & Placid HD for Buffalo IIISE - CCS and Shunt
Options
View
Go to last post Go to first unread
Previous Topic Next Topic
nvduybom  
#1 Posted : Thursday, January 24, 2013 8:13:10 AM(UTC)
nvduybom

Rank: Member

Groups: Member
Joined: 10/12/2012(UTC)
Posts: 5
Viet Nam
Location: Da Nang

Thanks: 1 times
Hello,

I use Placid HD & Placid HD BP for Buffalo IIISE DAC & Legato IV .

I assembly Placid HD & Placid HD BP but I'm confused about CCS and Shunt, so anyone help me clear .

With HD BP no load, I measure :

. Vol across R1( TP_VIN & TP_CCS) is 0.11V (110mA)
. Vol across R2( TP_OUT & TP_Shunt) is 0.05V (50mA)
. Vol OUT is 14.75V . Vol OUT increase 0.01V-0.02V in about 20 minutes .

All heatsink is warm, not hot .

I read in manual "5. Now adjust the CCS current (VR1) as needed for your application.", I use Legato with current load of about ~350mA , so I have to measure Vol across R1( TP_VIN & TP_CCS) increase to 0.35V (350mA) ? .

Thanks .

Van Duy

Edited by user Thursday, January 24, 2013 8:24:51 AM(UTC)  | Reason: Not specified
Back to top
WWW

Wanna join the discussion?! Login to your Twisted Pear Audio Support forum accountor Register a new forum account.
Back to top  
Corpius  
#2 Posted : Thursday, January 24, 2013 8:25:01 PM(UTC)
Corpius

Rank: Member

Groups: Member
Joined: 2/1/2012(UTC)
Posts: 332
Location: The Netherlands

Thanks: 4 times
Was thanked: 18 time(s) in 18 post(s)
Yes, but make sure that TP_OUT & TP_Shunt) stays about 0.05V (50mA). That would mean that the voltage measured over TP_VIN & TP_CCS should become about 0.400V (400mA)

350mA Legato + 50 mA shunt = 400mA
http://ce-designs.net/
Back to top
WWW
nvduybom  
#3 Posted : Friday, January 25, 2013 12:10:22 AM(UTC)
nvduybom

Rank: Member

Groups: Member
Joined: 10/12/2012(UTC)
Posts: 5
Viet Nam
Location: Da Nang

Thanks: 1 times
Originally Posted by: Corpius Go to Quoted Post
Yes, but make sure that TP_OUT & TP_Shunt) stays about 0.05V (50mA). That would mean that the voltage measured over TP_VIN & TP_CCS should become about 0.400V (400mA)

350mA Legato + 50 mA shunt = 400mA


Thanks you,

I measured CCS 500mA will decrease to 400mA, All heatsink is so hot .

Connect to Legato , all is ok . I measured all Legato output Ballance & SE is 0.1mV DC .
Back to top
WWW
Corpius  
#4 Posted : Friday, January 25, 2013 9:29:08 AM(UTC)
Corpius

Rank: Member

Groups: Member
Joined: 2/1/2012(UTC)
Posts: 332
Location: The Netherlands

Thanks: 4 times
Was thanked: 18 time(s) in 18 post(s)
Originally Posted by: nvduybom Go to Quoted Post
All heatsink is so hot
The heatsinks will become very hot when no load is connected :) With the load connected they should get warm, but not very hot.

http://ce-designs.net/
Back to top
WWW
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Youtube
Copyright © Twisted Pear Audio