Buff3 muffled sound Options  Watch this topic  Print this topic  Atom Feed  RSS Feed View » Normal Threaded

Previous Topic Next Topic

Colin Barron		#1 Posted : Sunday, February 26, 2012 3:03:15 PM(UTC)
Rank: Member Groups: Member Joined: 8/30/2011(UTC) Posts: 14 Location: Durham England		Buff3 plus Ivy, all connected ok. Voltages ok, all power supply lights on, as are the Trident led's. All Sw1 and Sw2 switches in off position. Using Toslink module, linked to D1 and ground. Lock led is lit. Music is muffled. Any ideas what i am doing wrong. Edited by user Sunday, February 26, 2012 3:07:10 PM(UTC)  | Reason: Not specified
User Profile View All Posts by User View Thanks

	Wanna join the discussion?! Login to your Twisted Pear Audio Support forum accountor Register a new forum account.

Russ White		#2 Posted : Sunday, February 26, 2012 6:26:49 PM(UTC)
Rank: Administration Groups: Administration, Customer Joined: 10/24/2006(UTC) Posts: 3,979 Location: Nashville, TN Thanks: 25 times Was thanked: 89 time(s) in 83 post(s)		SE out or balanced? Double check the relays.
		WWW
User Profile View All Posts by User View Thanks

Colin Barron		#3 Posted : Monday, February 27, 2012 1:23:54 PM(UTC)
Rank: Member Groups: Member Joined: 8/30/2011(UTC) Posts: 14 Location: Durham England		SE outputs and the only relay i have on the boards is on the ivy and looks the correct way around.
User Profile View All Posts by User View Thanks

avr300		#4 Posted : Tuesday, February 28, 2012 8:54:18 AM(UTC)
Rank: Member Groups: Member Joined: 6/17/2008(UTC) Posts: 921 Thanks: 1 times Was thanked: 70 time(s) in 69 post(s)		Does the relay on the IVY click when you power cycle the PSU ?
User Profile View All Posts by User View Thanks

Colin Barron		#5 Posted : Wednesday, February 29, 2012 9:25:32 AM(UTC)
Rank: Member Groups: Member Joined: 8/30/2011(UTC) Posts: 14 Location: Durham England		I cannot hear the relay operate but it may be working (difficult to hear over the noise of the transformer. The voltage across the coil is 8.7 volts, is that about right? Many Thanks
User Profile View All Posts by User View Thanks

avr300		#6 Posted : Wednesday, February 29, 2012 12:21:29 PM(UTC)
Rank: Member Groups: Member Joined: 6/17/2008(UTC) Posts: 921 Thanks: 1 times Was thanked: 70 time(s) in 69 post(s)		Not even close. The relay is 24 volt (+-12v equals 24 volts measured between the rails). What are your readings out of the powersupply for the IVY. Measure between: 1: v+ and gnd 2: gnd and v- Edited by user Wednesday, February 29, 2012 1:26:25 PM(UTC)  | Reason: Not specified
User Profile View All Posts by User View Thanks

Colin Barron		#7 Posted : Thursday, March 1, 2012 2:53:07 AM(UTC)
Rank: Member Groups: Member Joined: 8/30/2011(UTC) Posts: 14 Location: Durham England		Thanks to all who have helped. Dac now working. I read both manuals for the power supplies, but had set the voltage on both to 5.25v, Missing the IVY voltage setting of +/-12v so it is little wonder that a 24v relay would not pull in at 10.5 volts.
User Profile View All Posts by User View Thanks

Rss Feed  Atom Feed

Users browsing this topic

GuestUser (5)