Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login
Placid HD scratching sound
Options
View
Go to last post Go to first unread
Previous Topic Next Topic
bishopoz  
#1 Posted : Monday, February 27, 2012 12:46:41 AM(UTC)
bishopoz

Rank: Member

Groups: Member
Joined: 1/28/2010(UTC)
Posts: 25
Location: Sydney
Hi there,

I am using the lastest Placid HD version to power my Linkwitz Orion crossover. It went together with no problems and measured perfect but when I power up I get this scratching background sound. The overall sound quality is excellent but the scratching is always there on both channels.

Any ideas where to look?

Thanks

Paul
Back to top

Wanna join the discussion?! Login to your Twisted Pear Audio Support forum accountor Register a new forum account.
Back to top  
toast  
#2 Posted : Monday, February 27, 2012 9:46:47 PM(UTC)
toast

Rank: Advanced Member

Groups: Member
Joined: 3/31/2011(UTC)
Posts: 45
Location: Malaysia
What is the reading before and after connect to load? What is transformer spec?
Back to top
bishopoz  
#3 Posted : Tuesday, February 28, 2012 2:56:44 AM(UTC)
bishopoz

Rank: Member

Groups: Member
Joined: 1/28/2010(UTC)
Posts: 25
Location: Sydney
Setup for 12v output and 330ma and about 80ma shunted when powered up, the tranfo is supplying 17v.
Back to top
bishopoz  
#4 Posted : Thursday, March 8, 2012 2:52:27 AM(UTC)
bishopoz

Rank: Member

Groups: Member
Joined: 1/28/2010(UTC)
Posts: 25
Location: Sydney
I am thinking it must be a cap problem and have resoldered them but problem remains, would too much heat on the main output caps be a possibility.?
Back to top
Brian Donegan  
#5 Posted : Thursday, March 8, 2012 5:46:05 AM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
The voltage is not sagging when the load is connected, correct?

Did you useable different supply before the Placid? If so, does the scratching go away if you swap it back in?
Back to top
WWW
avr300  
#6 Posted : Thursday, March 8, 2012 10:08:02 AM(UTC)
avr300

Rank: Member

Groups: Member
Joined: 6/17/2008(UTC)
Posts: 921
Denmark

Thanks: 1 times
Was thanked: 70 time(s) in 69 post(s)
This is very interesting, and potentially explaining an issue I had had with no less than 2 Legatos' - perhaps the origin of the whole problem was the powersupply. Hmm. I wasn't that broad minded.. Brick wall Sorry about that.

Legato pops and scratch

I said I cured the problem by changing the power resistors - to be frank the cover has not been mounted ever since - and the problem has newer been heard ever since. But the whole rig has not been as hot as "before".

Listing in eager...

Edited by user Thursday, March 8, 2012 10:27:06 AM(UTC)  | Reason: Not specified
Back to top
bishopoz  
#7 Posted : Thursday, March 8, 2012 11:18:03 PM(UTC)
bishopoz

Rank: Member

Groups: Member
Joined: 1/28/2010(UTC)
Posts: 25
Location: Sydney
Hi Brian,

No voltage sag.

I would tried an alternative if I had one! The last ps died, I thought about wiring up two 9v batteries, think that would at least test the crossover.

I am off to Europe for work over next 4 weeks but will get back to it on my return if you have any pointers?

The annoying thing is the sound is fundamentally great except for the scratching/popping in the background (louder on one channel).

Paul
Back to top
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (4)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Youtube
Copyright © Twisted Pear Audio