LCDPS voltage question Options  Watch this topic  Print this topic  Atom Feed  RSS Feed View » Normal Threaded

Previous Topic Next Topic

hkminn		#1 Posted : Wednesday, February 15, 2012 4:01:28 AM(UTC)
Rank: Member Groups: Member Joined: 3/9/2009(UTC) Posts: 65 Location: seoul, korea		Hello, I have Buffalo24 connected to a LCDPS. I adjusted DV to 6V, AV to 6.6V with DAC disconnected. When I connect DAC, the DV drops to 3.8v while AV stays at 6.6V. Is this normal? Thank you.
User Profile View All Posts by User View Thanks

	Wanna join the discussion?! Login to your Twisted Pear Audio Support forum accountor Register a new forum account.

steinholien		#2 Posted : Wednesday, February 15, 2012 6:13:17 AM(UTC)
Rank: Advanced Member Groups: Member Joined: 6/12/2008(UTC) Posts: 79 Location: Norway		Thats not how it should be. Could be that either the VD draws to much current or that your transformer is to small. What VA transformer do you use?
User Profile View All Posts by User View Thanks

Brian Donegan		#3 Posted : Wednesday, February 15, 2012 7:52:06 AM(UTC)
Rank: Administration Groups: Administration, Customer Joined: 10/24/2006(UTC) Posts: 2,868 Location: Massachusetts, USA Thanks: 2 times Was thanked: 141 time(s) in 134 post(s)		What are the values of the power resistors on the LCDPS?
		WWW
User Profile View All Posts by User View Thanks

hkminn		#4 Posted : Wednesday, February 15, 2012 8:45:03 AM(UTC)
Rank: Member Groups: Member Joined: 3/9/2009(UTC) Posts: 65 Location: seoul, korea		Thank you steinholien, It must be the transformer. I am using 10VA transformer with 2 9v tabs. I use one tab for DV and the other for AV. I thought 5VA would be enough, but obviously not. I will try with a different transformer. Thank you
User Profile View All Posts by User View Thanks

hkminn		#5 Posted : Wednesday, February 15, 2012 8:55:21 AM(UTC)
Rank: Member Groups: Member Joined: 3/9/2009(UTC) Posts: 65 Location: seoul, korea		Brian Donegan wrote: What are the values of the power resistors on the LCDPS? They are 10R 3w. I replace the transformer with 15VA, and DV drops to 4.6V., but AV stays the same, 6.6V Needs larger transformer? Thank you Edited by user Wednesday, February 15, 2012 8:58:28 AM(UTC)  | Reason: Not specified
User Profile View All Posts by User View Thanks

steinholien		#6 Posted : Wednesday, February 15, 2012 10:50:22 AM(UTC)
Rank: Advanced Member Groups: Member Joined: 6/12/2008(UTC) Posts: 79 Location: Norway		Try to replace the power resistors with something smaller. They limit the current in to the PSU. Something like 0-3 ohm should be ok. A 10VA transformer should work.
User Profile View All Posts by User View Thanks

Rss Feed  Atom Feed

Users browsing this topic

GuestUser (4)