Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
steinholien  
#1 Posted : 16 years ago
steinholien

Rank: Advanced Member

Groups: Member
Joined: 6/12/2008(UTC)
Posts: 79
Location: Norway

Hi!
Tried to implement the USB receiver in my set up this weekend. But something is not working as I want it to. Basicly the Buffalo doesn't lock and I get no sound. My setup is like this: USB receiver feeds S/PDIF to the MUX (have set the jumper to S/PDIF and tapping the signal from DO and Grnd). Have tried both input 2 and 3 on the MUX with the same result.. Seems like the conn between PC and USB receiver is OK. Any suggestions to what i should do??

Stein
Brian Donegan  
#2 Posted : 16 years ago
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
Do you get a Lock on the MUX?
steinholien  
#3 Posted : 16 years ago
steinholien

Rank: Advanced Member

Groups: Member
Joined: 6/12/2008(UTC)
Posts: 79
Location: Norway

Haven't mounted the LEDs on the MUX yet, so I don't know. There was something about a missing solderpad.... Will try to improvise a connection...

Stein
Brian Donegan  
#4 Posted : 16 years ago
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
Ah. Just jumper the LED's ground pin to the Ground pin of the control header (<1 cm away).
steinholien  
#5 Posted : 16 years ago
steinholien

Rank: Advanced Member

Groups: Member
Joined: 6/12/2008(UTC)
Posts: 79
Location: Norway

Well now I have sound. Don't know what I did to cause thatThink. And the lock led on the MUX is also functional Applause

Thanks!

Stein
Brian Donegan  
#6 Posted : 16 years ago
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
Please create a new thread for this.
Rss Feed  Atom Feed
Users browsing this topic
GuestUser
Similar Topics
HELP NEEDED - Lock with BIIISE, but no sound at all (Buffalo DAC)
by Son_of_Odin 4 years ago
new Buffalo-IIIse Pro 28, no sound (Buffalo DAC)
by HattoriHanzo 4 years ago
Buffalo III SE PRO NO SOUND (Buffalo DAC)
by gjgille 5 years ago
No sound from COD using Kali Reclocker and Raspberry Pi 3 (COD DAC Module)
by miklau 7 years ago
Joshua Tree no sound and no relay clicking (Joshua Tree Attenuator)
by MarnixM 9 years ago
No sound on balanced output (Legato Discrete I/V Stage)
by fernfrost 10 years ago
Mono sound from Opus (Opus DAC)
by Quadamp 10 years ago
One channel no sound update no sound anywhere (Legato Discrete I/V Stage)
by mjock3 10 years ago
Joshua tree with no sound... (Joshua Tree Attenuator)
by jaggel 10 years ago
R20 Burnt and no sound, where to check? (Sympatico)
by Hercules 10 years ago
Help with Retro (no sound) (Retro)
by jaggel 11 years ago
BII- Legato no sound balanced + - DC keep changing on power cycle. (Buffalo DAC)
by RDK845 12 years ago
Suddenly No Sound LH Channel (IVY I/V Stage)
by Jordo 13 years ago
Buffalo II+ Legato failed to work - no sound (Buffalo DAC)
by muzzy 13 years ago
stereo vs dual mono sound quality (General Questions)
by rdowdall 13 years ago
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.