Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login
Trafo dual secondaries
Options
View
Go to last post Go to first unread
Previous Topic Next Topic
vladimirb0b  
#1 Posted : Saturday, September 26, 2015 11:52:32 PM(UTC)
vladimirb0b

Rank: Member

Groups: Member
Joined: 3/21/2012(UTC)
Posts: 58

Thanks: 1 times
Would something like this work to power a LCDPS feeding SPDIF/COD/Metronome and Placid BP feeding IVY?

primary: 0-115V-230V

secondary: 15V-0-15V 1A (Center tap)

0-9V 2.22A


Power:50VA
Thanks!
-V
Back to top

Wanna join the discussion?! Login to your Twisted Pear Audio Support forum accountor Register a new forum account.
Back to top  
avr300  
#2 Posted : Sunday, September 27, 2015 7:41:37 AM(UTC)
avr300

Rank: Member

Groups: Member
Joined: 6/17/2008(UTC)
Posts: 921
Denmark

Thanks: 1 times
Was thanked: 70 time(s) in 69 post(s)
No.

You could use the 0-9v to power only the one half of the LCDPS (only the on half!). Whether this one half is able to power SPDIF/COD/Metronome or not, I don't know. You have to consult the manual.


You can't use the 15-0-15 for the Placid BP. It needs transformer with two separate secondary windings, like 0-15 + 0-15
Back to top
vladimirb0b  
#3 Posted : Sunday, September 27, 2015 7:59:18 PM(UTC)
vladimirb0b

Rank: Member

Groups: Member
Joined: 3/21/2012(UTC)
Posts: 58

Thanks: 1 times
Are you referring to this? *Please note that one transformer cannot power both a single (LCDPS or Placid) and a bipolar (LCBPS or Placid BP) at the same time, as it will result in a short circuit of the Ground channels.

If so, I am just using one transformer to power a single LCDPS with 9/0 and 9/0. Not a bipolar.

For the Placid, I would use 15/0/15/0 with ground between the two secondaries (the middle two numbers). That would I think give + and - 15v.
Back to top
avr300  
#4 Posted : Tuesday, September 29, 2015 5:20:05 PM(UTC)
avr300

Rank: Member

Groups: Member
Joined: 6/17/2008(UTC)
Posts: 921
Denmark

Thanks: 1 times
Was thanked: 70 time(s) in 69 post(s)
LCDPS needs 4 wires from the tranny. 0-9 & 0-9. If you only have 2 wires, 0-9 you can only power the one half.

For tranny for placid you need 4 wires. 15-0 & 15-0. The go to the 4 ways connection block. If your tranny only has 15-0-15 (3 wires, centre tapped) you cant use it.
Back to top
vladimirb0b  
#5 Posted : Tuesday, September 29, 2015 8:29:50 PM(UTC)
vladimirb0b

Rank: Member

Groups: Member
Joined: 3/21/2012(UTC)
Posts: 58

Thanks: 1 times
THanks! So this would work?

15V*2(1A 4 wires) + 9V*2（1.1A 4 wires）
Back to top
avr300  
#6 Posted : Wednesday, September 30, 2015 5:20:25 PM(UTC)
avr300

Rank: Member

Groups: Member
Joined: 6/17/2008(UTC)
Posts: 921
Denmark

Thanks: 1 times
Was thanked: 70 time(s) in 69 post(s)
I would step up in current.

Look at the stock trannies.

http://www.twistedpearaudio.com/power/transformers.aspx

They are doing more than 1A per winding.
Back to top
Rss Feed  Atom Feed
Users browsing this topic
GuestUser
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Youtube
Copyright © Twisted Pear Audio