sorry repost from diya as i just found out about this. careless me :)

hi guys

i setup my buffalo to run stereo mode using the Leon's guide. Thanks Leon.

i use qls qa 550 as a source for the I2S inputs. when connected to the sabre. the lock LED is on.

then i use transformer for the output. i connect the out + and out - to the primary of the 600:600 transformer. then connect the ground to the secondary side of the transformer to have the Single Ended out from the transformer.

I does sing nicely. but there is a distorted sound that follow the music. its very obvious when playing vocals and music seems noisy.

All the switches are set to OFF. input voltage is 5.25v and using all tridents.

any idea is really welcomed and appreciated.

regards,
erwin

thanks Brian

another quick question.

what the I2s voltage does the B III required? is 3.3v enough?

thanks
erwin