Rank: Member
Groups: Member
Joined: 5/19/2012(UTC) Posts: 28  Location: Cumming,Ga Thanks: 1 times
Was thanked: 1 time(s) in 1 post(s)
|
Hello - I was scanning the BOM for the Placid HD power supply and noticed that the capacitor part number listed for the 220 nf C2,C3 is the same as the 100nf C4. Is this a cut & paste error or can the c2 cap be used in c4?
C2, C3 2 220nf Capacitor C050-055X075 Wima MKP2-.1/100/10 Mouser 505-MKP2.1/100/10
C4 1 100nf Capacitor C050-055X075 Wima MKP2-.1/100/10 Mouser 505-MKP2.1/100/10
Thanks
Rick
|
|
|
|
|
|
Rank: Member
Groups: Member
Joined: 4/9/2011(UTC)
Posts: 37
Location: Lisbon
Thanks: 1 times
|
I've notice that, in the schematic says 0.1uF for C4 and 220nF for C3 and C2. Also R12 is 2K in schematic and 271-1K-RC in the BOM, same as R5 and R6. The trimpots are 72-T93YA-10K, but in schematic says 20K. On the Placid BP HD v 1.0 schematic they are 10K. A litle confused but i'll go for the schematics.
Cheers
Luis
|
|
|
|
|
|
Rank: Administration
Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA
Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
|
I just fixed both Placid BOMs.
R12 should be 2K (part number updated)
VR1/2 should be 10K (value updated)
C4 should be 220nF (part number updated)
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
