Hmmm.
Buffalo III for stereo operation with sidecar and spdif4.
I have put all SW1 and SW2 to OFF. What for SW2.8 Input remapping?

---

Ref: Preparing the board-first steps p17:
Sidecar and S/PDIF-4 Input Board integration
If you want to use the Sidecar or S/PDIF-4 Input Board, remove any jumpers (if present) from:
 JPCM1 (JPCM1, 3)
 JPCM2 (JPCM2, 1)
 JPCM3 (JPCM3, 2)
 JDSD1 (JDSD1, 5)
 JDSD2 (JDSD2, 4)
And set the DIP switch Input remapping to ON.

Ref: DIP settings p28:
Input remapping - This setting enables the use of the Sidecar module by remapping the inputs of the internal DACs. When
ON it maps the DACs 1, 2, 5, and 6 to the DACs 3,4,7, and 8 respectively.

---

Ehhh. So should I put it to ON or OFF in my "stereo-sidecar-spdif4"-case?

Cheers
Tom

Edited by user Monday, September 19, 2011 8:40:27 AM(UTC)  | Reason: Not specified

Thanks! :-)