Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login
Placid as a PS for an EVO
Options
View
Go to last post Go to first unread
Previous Topic Next Topic
MartinC700  
#1 Posted : Saturday, October 2, 2010 9:14:27 PM(UTC)
MartinC700

Rank: Advanced Member

Groups: Member
Joined: 9/7/2010(UTC)
Posts: 43
Location: San Diego

Thanks: 1 times
Just competed a slightly modded Placid to power my M2Tech Evo. Very happy with the results, a big improvement over the stock wall wart. Mods to the Placid were Schottky diodes and a larger smoothing cap.

UserPostedImage


UserPostedImage

Edited by user Sunday, October 3, 2010 8:36:59 PM(UTC)  | Reason: Not specified
Back to top

Wanna join the discussion?! Login to your Twisted Pear Audio Support forum accountor Register a new forum account.
Back to top  
Lizard_King  
#2 Posted : Wednesday, May 4, 2011 9:39:46 PM(UTC)
Lizard_King

Rank: Member

Groups: Member
Joined: 5/4/2011(UTC)
Posts: 1
Location: NY
Hello,

I am looking at your unit and i really like it. May I please ask you where you bough that enclosure. I also have an EVO and i want to build a PSU like yours.

Thanks in advance.


MartinC700 wrote:
Just competed a slightly modded Placid to power my M2Tech Evo. Very happy with the results, a big improvement over the stock wall wart. Mods to the Placid were Schottky diodes and a larger smoothing cap.

UserPostedImage


UserPostedImage
Back to top
MartinC700  
#3 Posted : Monday, July 11, 2011 9:01:02 PM(UTC)
MartinC700

Rank: Advanced Member

Groups: Member
Joined: 9/7/2010(UTC)
Posts: 43
Location: San Diego

Thanks: 1 times
I replied to Paul via email, but in case anyone else needs the details.

The case I used was ordered from Mouser, details as below:

546-1457N1601
Hammond Enclosures, Boxes, & Cases
6.3 x 4.09 x 2.15
US HTS: 8538.10.0000 ECCN:EAR99

With the transformer, and Placid, space is pretty tight. I cut a 0.064"
thk sheet of aluminum as a chassis thay slides into the Hammond case, I also mounted the Placid transistors on the lower side of the circuit, so that they could bolt directly to this chassis plate to give good cooling.

The front and rear ends were custom from Front Panel Express.

Edited by user Monday, July 11, 2011 9:15:17 PM(UTC)  | Reason: Not specified
Back to top
Russ White  
#4 Posted : Monday, July 11, 2011 9:28:48 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Good work! :)
Back to top
WWW
suffolk tony  
#5 Posted : Tuesday, July 12, 2011 1:51:12 AM(UTC)
suffolk tony

Rank: Member

Groups: Member
Joined: 9/14/2010(UTC)
Posts: 84
Location: uk
That's very interesting Martin! Once my two Placid HDs arrive I'll have a couple of "standard" Placids hanging about looking for work. That'll do nicely for one of them!

Best wishes,

Tony.
Back to top
Brian Donegan  
#6 Posted : Tuesday, July 12, 2011 4:19:43 AM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
That's not JB-Weld inside the transformer, is it?
Back to top
WWW
MartinC700  
#7 Posted : Tuesday, November 1, 2011 7:43:39 PM(UTC)
MartinC700

Rank: Advanced Member

Groups: Member
Joined: 9/7/2010(UTC)
Posts: 43
Location: San Diego

Thanks: 1 times
Brian Donegan wrote:
That's not JB-Weld inside the transformer, is it?


No, but very similar! It's aluminum powder filled epoxy but it is non conductive.
Back to top
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Youtube
Copyright © Twisted Pear Audio