Hi Russ and Brian,

I just completed my Buffalo32s build and it sounds AMAZING however there are a couple of problems I hope you can help me with.

The first problem is that my Volumite doesn't appear to work - all I get is full volume. I have checked the connections over and over and all seems fine - just to check I took my old (fully functional) Volumite out of my Buffalo24 and swapped the firmware controllers and tried that out but to no avail - the problem persists.
I have checked the voltages and everything seems in order so I'm at a loss as to why I can't control the Volume on the 32s.
I'm now worried that the problem is with the Buffalo32s and not the Volumite.

Any suggestions you have to solve this would be most appreciated.

The second problem is that I get drop out's regularly during playback I generally loose lock for about a second or two - quite frequently, I am guessing it could be a grounding problem - I have L1 and L2 pads bridged as recommended. I never had this problem with my old Buffalo24 and I've wired the grounding scheme pretty much the same - is there something I've missed?

Thank you very much in advance for your help - I have to say that I'm just blown away by the sound of your products thank you so much for getting me closer to the sound I dream of.

Cheers

James

Thanks Russ, I feel like such a dumbass no I totally forgot about it - I removed the on-board controller and everything works perfectly - and no more drop outs

Thanks again for your support and a well designed great sounding piece of kit.

Take care

James