Hello,

I bought a Buffalo IIISE Pro from another builder. I am getting static when trying to run sampling rates higher than 192 kHz. I searched forums and found that one needs to add through hole resistor R4 on the 1.2V trident in order to raise the current enough for the extended sampling rates. The integration guide speaks of Trident V1.0 and 3.0, but the version included with my DAC has V2.0 printed on the board, and no marking for R4. There appears to be a set of through holes surrounding R1, but no marking. I've attached an image of the regulator, and would be thankful for some feedback on how I raise the current for this particular version of the Trident.

Thank you

TridentSRSmall.jpg (240kb) downloaded 7 time(s).