Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
JohnG  
#1 Posted : Thursday, December 29, 2016 9:51:47 PM(UTC)
JohnG

Rank: Member

Groups: Member
Joined: 9/6/2016(UTC)
Posts: 16

I have 2 Placid BP HD. One works fine, but on the other one the 4 1W resistors start to glow within 20 seconds. Same transformer. No load. It happens to both sides of the BP. Since I only have a few seconds, I dont get much time to measure voltages. Any recommendation on what to check to narrow down the issue? I did see that I have about 4v drop across R2

Thanks, John
avr300  
#2 Posted : Friday, December 30, 2016 8:33:40 PM(UTC)
avr300

Rank: Member

Groups: Member
Joined: 6/17/2008(UTC)
Posts: 921
Denmark

Thanks: 1 times
Was thanked: 70 time(s) in 69 post(s)
Check component placement.

Also post a good shartp picture of front and backside.
JohnG  
#3 Posted : Friday, December 30, 2016 10:04:56 PM(UTC)
JohnG

Rank: Member

Groups: Member
Joined: 9/6/2016(UTC)
Posts: 16

Here are the front and back. I went around the bottom to check continuity where there shouldnt be.

UserPostedImage

UserPostedImage
avr300  
#4 Posted : Saturday, December 31, 2016 2:01:16 PM(UTC)
avr300

Rank: Member

Groups: Member
Joined: 6/17/2008(UTC)
Posts: 921
Denmark

Thanks: 1 times
Was thanked: 70 time(s) in 69 post(s)
Have you checked that all components are in the right spots ?
JohnG  
#5 Posted : Friday, January 6, 2017 4:09:09 AM(UTC)
JohnG

Rank: Member

Groups: Member
Joined: 9/6/2016(UTC)
Posts: 16

You were spot on. I had checked all that I could see easily, but had swapped some of the NPN and PNP's. That's why both sides were off. Now its working fine. And those resistors seem to be fine after having glowed.
avr300  
#6 Posted : Friday, January 6, 2017 2:54:01 PM(UTC)
avr300

Rank: Member

Groups: Member
Joined: 6/17/2008(UTC)
Posts: 921
Denmark

Thanks: 1 times
Was thanked: 70 time(s) in 69 post(s)
Cool.
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (4)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.