BBB reclocking not working - Bad voltages everywhere Options  Watch this topic  Print this topic  Atom Feed  RSS Feed View » Normal Threaded

Previous Topic Next Topic

G600		#1 Posted : Wednesday, March 9, 2016 5:13:34 PM(UTC)
Rank: Member Groups: Member Joined: 3/9/2016(UTC) Posts: 7		Hello Fellas. I have discussed my problem several times on DIYaudio (like here). I came to the conclusion there is something wrong with the voltage regulation, maybe some fried ICs... Is there anybody I can send the kit to for a repair ? Maybe directly to you, TPA guys ? Thanks JD
User Profile View All Posts by User View Thanks

	Wanna join the discussion?! Login to your Twisted Pear Audio Support forum accountor Register a new forum account.

Russ White		#2 Posted : Wednesday, March 9, 2016 10:44:33 PM(UTC)
Rank: Administration Groups: Administration, Customer Joined: 10/24/2006(UTC) Posts: 3,979 Location: Nashville, TN Thanks: 25 times Was thanked: 89 time(s) in 83 post(s)		Sorry I missed that post. Can you describe what makes you think there is a regulator issue?
		WWW
User Profile View All Posts by User View Thanks

G600		#3 Posted : Thursday, March 10, 2016 6:14:44 AM(UTC)
Rank: Member Groups: Member Joined: 3/9/2016(UTC) Posts: 7		I cannot make the system to play music. Before connecting to my DAC, I checked voltages and I have 4.2V at cronus outputs, and the same at Hermes 3.3V spots (Cronus side). I'm supplying 5.5V regulated from a single PS (testing purpose for now). So I'm afraid there's something wrong...
User Profile View All Posts by User View Thanks

Russ White		#4 Posted : Thursday, March 10, 2016 7:41:36 PM(UTC)
Rank: Administration Groups: Administration, Customer Joined: 10/24/2006(UTC) Posts: 3,979 Location: Nashville, TN Thanks: 25 times Was thanked: 89 time(s) in 83 post(s)		Well unfortunately if that is the case the main components (the flip flop and possibly the clocks) on the cronus are likely already dead. I am not sure that there is a way to do a cost/labor effective repair. When you say Cronus outputs do you mean the signal outputs? mck, dck, D1, D2 etc?
		WWW
User Profile View All Posts by User View Thanks

G600		#5 Posted : Thursday, March 10, 2016 7:53:31 PM(UTC)
Rank: Member Groups: Member Joined: 3/9/2016(UTC) Posts: 7		Yes, the DAC outputs. So I'd better buy the whole thing again including clocks ?
User Profile View All Posts by User View Thanks

Russ White		#6 Posted : Thursday, March 10, 2016 10:16:54 PM(UTC)
Rank: Administration Groups: Administration, Customer Joined: 10/24/2006(UTC) Posts: 3,979 Location: Nashville, TN Thanks: 25 times Was thanked: 89 time(s) in 83 post(s)		If you have access to a scope you could check the clocks - just supply them 3.3V and see if they are still working.
		WWW
User Profile View All Posts by User View Thanks

G600		#7 Posted : Friday, March 11, 2016 6:18:40 AM(UTC)
Rank: Member Groups: Member Joined: 3/9/2016(UTC) Posts: 7		Not that easy... Just tu make sure, The Hermes has to be replaced too ?
User Profile View All Posts by User View Thanks

G600		#8 Posted : Tuesday, April 5, 2016 7:36:17 PM(UTC)
Rank: Member Groups: Member Joined: 3/9/2016(UTC) Posts: 7		Hello. Before bricking my Cronus board again, I would like some additional help. I'm feeding the DAC with RAW DC around 14.7 V. How much current is drawn from the 5V line at Cronus side ? And does it change with / without playback and sample rate ? What resistor value should I put between that raw PS and Cronus's entry to be safe with every scenario ? Edited by user Tuesday, April 5, 2016 7:36:49 PM(UTC)  | Reason: Not specified
User Profile View All Posts by User View Thanks

gwikse		#9 Posted : Tuesday, April 5, 2016 7:56:09 PM(UTC)
Rank: Member Groups: Member Joined: 1/19/2011(UTC) Posts: 332 Location: Oslo, Norway Thanks: 14 times Was thanked: 17 time(s) in 17 post(s)		Originally Posted by: G600 Hello. Before bricking my Cronus board again, I would like some additional help. I'm feeding the DAC with RAW DC around 14.7 V. How much current is drawn from the 5V line at Cronus side ? And does it change with / without playback and sample rate ? What resistor value should I put between that raw PS and Cronus's entry to be safe with every scenario ? I am hoping that is not a TPA DAC board. If it is.... eeh, thats fried (beyond smelling funny, its proporably burning).
User Profile View All Posts by User View Thanks

G600		#10 Posted : Tuesday, April 5, 2016 8:02:12 PM(UTC)
Rank: Member Groups: Member Joined: 3/9/2016(UTC) Posts: 7		No, it's a DDDAC with local regulation, accepting up to 35 V.
User Profile View All Posts by User View Thanks

Grael		#11 Posted : Wednesday, April 6, 2016 1:41:49 PM(UTC)
Rank: Member Groups: Member Joined: 4/6/2016(UTC) Posts: 1 Location: 35		If it's a DDDAC with blue mainboard (and SPDIF option), maybe you can use his 5V regulated output which you can tap on the I2S connector. Or better, get a dedicated 5V power supply! I have one with the same regulator chip (ADM7150ARDZ) than the one included on the Cronus (but 5V versus 3.3V) Or even better, which is what I've done, remove the 5V regulator from the DDDAC mainboard and use the same better 5V power supply you use on the Cronus.
User Profile View All Posts by User View Thanks

G600		#12 Posted : Wednesday, April 6, 2016 5:09:46 PM(UTC)
Rank: Member Groups: Member Joined: 3/9/2016(UTC) Posts: 7		I have a dedicated regulated PS for BBB and Botic. But I want low impedance unregulated DC to go to Cronus. One regulation is better than two. Any idea of the dropping resistor value ?
User Profile View All Posts by User View Thanks

Rss Feed  Atom Feed

Users browsing this topic

GuestUser (5)