Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login
Issue 2mhz signal on buffalo output
Options
View
Go to last post Go to first unread
Previous Topic Next Topic
chalkandtalk  
#1 Posted : Tuesday, December 22, 2015 3:59:51 PM(UTC)
chalkandtalk

Rank: Member

Groups: Member
Joined: 9/11/2007(UTC)
Posts: 8
Location: England
Hi

I have one of the original buffalo dacs with the original ivy. The dac is working well. However, I put a scope on the balanced output today and find that there is a 2mhz signal at 15v.

Can anyone tell me if there would be an obvious solution?

Thank you
Back to top

Wanna join the discussion?! Login to your Twisted Pear Audio Support forum accountor Register a new forum account.
Back to top  
avr300  
#2 Posted : Friday, December 25, 2015 2:46:42 PM(UTC)
avr300

Rank: Member

Groups: Member
Joined: 6/17/2008(UTC)
Posts: 921
Denmark

Thanks: 1 times
Was thanked: 70 time(s) in 69 post(s)
Hi..

Define "original". The very first Buffalo, like this?

cut.jpg (43kb) downloaded 15 time(s).

And this IVY

ivy1.jpg (34kb) downloaded 14 time(s).

Edited by user Friday, December 25, 2015 2:52:43 PM(UTC)  | Reason: Not specified
Back to top
avr300  
#3 Posted : Friday, December 25, 2015 2:51:10 PM(UTC)
avr300

Rank: Member

Groups: Member
Joined: 6/17/2008(UTC)
Posts: 921
Denmark

Thanks: 1 times
Was thanked: 70 time(s) in 69 post(s)
If so, how is your layout.

Stacked (over-under) or flat (side-by-side) ?
Back to top
chalkandtalk  
#4 Posted : Saturday, December 26, 2015 12:19:52 PM(UTC)
chalkandtalk

Rank: Member

Groups: Member
Joined: 9/11/2007(UTC)
Posts: 8
Location: England
HI AVR

Thanks for your reply and assistance.

Yes those are the boards. My dac board s v1.1.

Ivy is stacked above the Dac. There is a Mux which is laid to the side of the other two.

The oscilloscope shows nothing on the dac board output when there's nothing input. However, there is definitely something on the output of the ivy.


Thank you

Aidan
Back to top
avr300  
#5 Posted : Saturday, December 26, 2015 1:57:56 PM(UTC)
avr300

Rank: Member

Groups: Member
Joined: 6/17/2008(UTC)
Posts: 921
Denmark

Thanks: 1 times
Was thanked: 70 time(s) in 69 post(s)
Please check single ended out. Is that clean?
Back to top
chalkandtalk  
#6 Posted : Sunday, January 3, 2016 4:20:43 PM(UTC)
chalkandtalk

Rank: Member

Groups: Member
Joined: 9/11/2007(UTC)
Posts: 8
Location: England
Hi

Just checked single ended out which is clean.

I also shorted the input to ivy and noticed that the output did change. There was something on the output but my scope couldn't measure it. Now that the dac input is reconnected the 2 MHz signal is back.

Very strange. Perhaps I should just buy an ivy 3?

Happy New Year

Aidan
Back to top
avr300  
#7 Posted : Sunday, January 3, 2016 7:13:04 PM(UTC)
avr300

Rank: Member

Groups: Member
Joined: 6/17/2008(UTC)
Posts: 921
Denmark

Thanks: 1 times
Was thanked: 70 time(s) in 69 post(s)
Try increasing the distance between the dac and the Ivy. I remember having a noise issue. Cured it by changing to side by side layout and using shielded interconnect.
Back to top
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (4)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Youtube
Copyright © Twisted Pear Audio