Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
danielone  
#1 Posted : Thursday, November 19, 2015 1:48:42 PM(UTC)
danielone

Rank: Member

Groups: Member
Joined: 11/19/2015(UTC)
Posts: 2
Zimbabwe

Hello,

My Trident 1.2V arrived without the shunt transistor. The component was not inside the bag so check because the fault is at the very origin of the part.

BTW no problem because I had the right part in stock and I soldered it by myself.

Sorry if I am wrong but the voltage at the inverting input of the opamp violates the common-mode voltage input range on the negative side. Being single supply the voltage on IN- should not be lower than ground + 1.5V (refer to OPA209 DS). Measured value is 1.17V for the 1.2V output version.

How can I expect a predictable behaviour from the opamp?

Thank you for your answer :)

D.
LeonvB  
#2 Posted : Thursday, November 19, 2015 6:38:12 PM(UTC)
LeonvB

Rank: Member

Groups: Member
Joined: 5/23/2010(UTC)
Posts: 708
Location: Netherlands

Thanks: 2 times
Was thanked: 48 time(s) in 45 post(s)
Which version of the Trident are you using? The latest has 2 resistors: SMD and through hole. If the through hole resistor is not in the bag, it's likely already in place (SMD).
danielone  
#3 Posted : Thursday, November 19, 2015 8:11:56 PM(UTC)
danielone

Rank: Member

Groups: Member
Joined: 11/19/2015(UTC)
Posts: 2
Zimbabwe

Guy read my post again, I wrote the shunt transistor was missing. Not resistors. :)

Edited by user Thursday, November 19, 2015 8:12:32 PM(UTC)  | Reason: Not specified

LeonvB  
#4 Posted : Thursday, November 19, 2015 10:24:35 PM(UTC)
LeonvB

Rank: Member

Groups: Member
Joined: 5/23/2010(UTC)
Posts: 708
Location: Netherlands

Thanks: 2 times
Was thanked: 48 time(s) in 45 post(s)
Sorry, but I had a hard time understanding what you're writing. My best bet was that instead of transistor you meant resistor, because I fail to see how the module could possibly pass Brians' testing without the transistor.
Russ White  
#5 Posted : Friday, November 27, 2015 11:44:17 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
As for the question on the common mode voltage - this is one of the reasons we went with this particular op amp. It actually works quite well with 1.2V at V- (actually testing and measuring) because of the total correction mode. For most circuits I would never try it. We simply haven't found anything better to use yet. :)

Cheers!
Russ
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (3)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.