Rank: Member
Groups: Member
Joined: 10/15/2008(UTC)
Posts: 21
Location: Brazil / SP
|
Hello i received my volumite 20, Feb, and soldered all components.
When i tried to hook up the volumite, there was no sound in minimal and maximum, so i tried disconect volumite SCL/SDA/GND, alls fine with the DAC.
So i tried to connect the volumite when the DAC was on and worked, but if i turned off the DAC, happens again.
The autolock led is on.
Using SPDIF
All DIP switch on "+"
[]s
cya |
|
|
|
|
|
|
Rank: Member
Groups: Member
Joined: 10/15/2008(UTC)
Posts: 21
Location: Brazil / SP
|
Well, alls fine now...
Putted the DIP switch 3 in "-"...
tks again cya...
|
|
|
|
|
|
|
Rank: Member
Groups: Member
Joined: 10/15/2008(UTC)
Posts: 21
Location: Brazil / SP
|
Still not working...
Don't understand, why last night worked and this mornig not?
Automute is on, and lock is off.
|
|
|
|
|
|
|
Rank: Administration
Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN
Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
|
You need to be sure that the Buffalo is fully powered at the same time or before the volumite. That means you cannot use a low starting VREG. LCDPS works perfectly. So if that's what you are using you should be fine.
Make sure that the Buffalo is configured for SPDIF input as per the manual.
Check your source.
Cheers!
Russ
|
|
|
|
|
|
Rank: Member
Groups: Member
Joined: 10/15/2008(UTC)
Posts: 21
Location: Brazil / SP
|
Hmm... probably was that, im using a Super Jung regulator to feed the Buffalo, and using the LCBPS to feed the Volumite.
Ill try use the Super Jung regulator to feed both.
tks
|
|
|
|
|
|
|
Rank: Member
Groups: Member
Joined: 10/15/2008(UTC)
Posts: 21
Location: Brazil / SP
|
Ok now it's working, but im feeding the volumite supply with the VDD on buffalo, take it from pin RESET.
TKS
Just a question when counterpoint board will be avaliable?
|
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
