Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
Quadamp  
#1 Posted : Thursday, November 28, 2013 9:13:50 PM(UTC)
Quadamp

Rank: Member

Groups: Member
Joined: 11/28/2013(UTC)
Posts: 28
United Kingdom
Location: Pudsey

Thanks: 1 times
Just finished building HD power supply. Fine all light on.

However wired up Ready built opus dac and receiver. The 4 led on receiver all non lit. Checked voltage supply and this is at 7.5 volts for both sac and receiver. Will take photos soon and post.

My first dac build but not my first venture with a hot soldering iron. Although with my eyes i,m better with a big board and tag boards on a valve amp. My 60 year old Radford STA15 is still going strong after a two rebuilds by me.


Welcome any support/advise.
avr300  
#2 Posted : Sunday, December 1, 2013 9:52:07 AM(UTC)
avr300

Rank: Member

Groups: Member
Joined: 6/17/2008(UTC)
Posts: 921
Denmark

Thanks: 1 times
Was thanked: 70 time(s) in 69 post(s)
Originally Posted by: Quadamp Go to Quoted Post
Checked voltage supply and this is at 7.5 volts for both sac and receiver. Will take photos soon and post.


Is the 7.5v measured with the DAC and WM8804 connected ?

Photos - yes.

Quadamp  
#3 Posted : Monday, December 2, 2013 7:36:07 PM(UTC)
Quadamp

Rank: Member

Groups: Member
Joined: 11/28/2013(UTC)
Posts: 28
United Kingdom
Location: Pudsey

Thanks: 1 times
no. I measured the voltage before connecting the regulated power supply. I adjustable them to 7.5 volts before connect to the DAC and WM8804. The regulated supply are from a company called. Avondale audio. http://avondaleaudio.com/TPR2.html
I haves used them before on other circuits with no issue. Do I need to connect to DAc and WM8804 and adjust again to read 7.5 volts on the terminals.

I also have a big LAB power supply which can be switched to 7.5 volts (1.5 amps) if current is an issue.
avr300  
#4 Posted : Tuesday, December 3, 2013 6:33:55 PM(UTC)
avr300

Rank: Member

Groups: Member
Joined: 6/17/2008(UTC)
Posts: 921
Denmark

Thanks: 1 times
Was thanked: 70 time(s) in 69 post(s)
Sorry, I can't follow you.

How is your power supply arrangement arranged ;-)

Picture, please.

Is the TPR2 between the Placid HD and the DAC/receiver?

Have you followed the adjustment procedure for the Placid HD regarding shunt current?
Quadamp  
#5 Posted : Tuesday, January 6, 2015 5:36:14 PM(UTC)
Quadamp

Rank: Member

Groups: Member
Joined: 11/28/2013(UTC)
Posts: 28
United Kingdom
Location: Pudsey

Thanks: 1 times
Sorry been out of circulation for a long time. Lost my job, got a new job been uber buzzy.

Anyways I hope I can get some help with my project.

I now have LIGHT ON as follows.

Trans err.. Green light on
UNlock ....Red light on
NON audio.. Green light on
Gen Flag.. No light at all.

The dip switches are set for SPDIF in and I have fed a digital signal from two different CD players (Linn Genki and an old marantz) with no change in the lights. Voltage to power measures 7.5 volts.

Help please



Brian Donegan  
#6 Posted : Tuesday, January 6, 2015 6:02:43 PM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
There are no situations where one of the LEDs should not be lit. There is something wrong with the board.

I picture would help.
Quadamp  
#7 Posted : Tuesday, January 6, 2015 8:20:12 PM(UTC)
Quadamp

Rank: Member

Groups: Member
Joined: 11/28/2013(UTC)
Posts: 28
United Kingdom
Location: Pudsey

Thanks: 1 times
See attached

UserPostedImage

UserPostedImage

Edited by moderator Tuesday, January 6, 2015 8:27:19 PM(UTC)  | Reason: Not specified

File Attachment(s):
reciever 281 kb.jpg (275kb) downloaded 353 time(s).
reciever end view 284 kb.jpg (280kb) downloaded 353 time(s).

You cannot view/download attachments. Try to login or register.
Brian Donegan  
#8 Posted : Tuesday, January 6, 2015 8:28:36 PM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
S/PDIF input signal and ground are reversed.

Also, it is better to not twist the I2S lines together, though that is not related to this problem.


As for the LED, my guess is dead LED or bad solder joint on one of its pins.

Edited by user Tuesday, January 6, 2015 8:30:38 PM(UTC)  | Reason: Not specified

Quadamp  
#9 Posted : Tuesday, January 6, 2015 8:49:49 PM(UTC)
Quadamp

Rank: Member

Groups: Member
Joined: 11/28/2013(UTC)
Posts: 28
United Kingdom
Location: Pudsey

Thanks: 1 times
many thanks. will check out led tomorrow.

The spdif has been tried both ways round just in case I had a problem at the other end of the lead. I will put it back to the correct way round.

Fingers crossed it works
Quadamp  
#10 Posted : Wednesday, January 7, 2015 12:11:07 PM(UTC)
Quadamp

Rank: Member

Groups: Member
Joined: 11/28/2013(UTC)
Posts: 28
United Kingdom
Location: Pudsey

Thanks: 1 times
resoldered led now working. Also reversed spdif connection.

Also checked other solder joints on connection blocks and they seem fine.

However I now have lights as follows.
TRAN ERR green
Unlock Red
Non audio green
gen flag red.



Quadamp  
#11 Posted : Wednesday, January 7, 2015 12:13:52 PM(UTC)
Quadamp

Rank: Member

Groups: Member
Joined: 11/28/2013(UTC)
Posts: 28
United Kingdom
Location: Pudsey

Thanks: 1 times
see picture

UserPostedImage

Edited by moderator Thursday, January 8, 2015 3:24:20 PM(UTC)  | Reason: Not specified

File Attachment(s):
latest board picture low q.jpg (316kb) downloaded 319 time(s).

You cannot view/download attachments. Try to login or register.
Russ White  
#12 Posted : Wednesday, January 7, 2015 1:55:12 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
This can happen if a source is sending LPCM instead of PCM over SPDIF. What is your source? And what kind of stream are you sending?
Quadamp  
#13 Posted : Wednesday, January 7, 2015 4:05:34 PM(UTC)
Quadamp

Rank: Member

Groups: Member
Joined: 11/28/2013(UTC)
Posts: 28
United Kingdom
Location: Pudsey

Thanks: 1 times
Source is a CD player Linn Genki. I also tried a marantz cd player with no change to light status. Ultimately I wish to use the SPDIF output from a SONOS player. The lights stay the same irrespective of whether a source is plugged in or not. Have I set the dip switches correctly. I think I have but see picture .

Regards

Phil

UserPostedImage

Edited by moderator Thursday, January 8, 2015 3:24:02 PM(UTC)  | Reason: Not specified

File Attachment(s):
dip setting and light status.jpg (311kb) downloaded 316 time(s).

You cannot view/download attachments. Try to login or register.
Quadamp  
#14 Posted : Thursday, January 8, 2015 12:55:10 PM(UTC)
Quadamp

Rank: Member

Groups: Member
Joined: 11/28/2013(UTC)
Posts: 28
United Kingdom
Location: Pudsey

Thanks: 1 times
Appreciate a response. Noting other threads I may well have a faulty reciever board (replacement needed ?)
Brian Donegan  
#15 Posted : Thursday, January 8, 2015 3:25:22 PM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
I think your DIP switches are reversed. Try 1 0 0 1. In the picture they are 0 1 1 0.

EDIT: + - - + instead of - + + -

Edited by user Thursday, January 8, 2015 3:58:02 PM(UTC)  | Reason: Not specified

Quadamp  
#16 Posted : Friday, January 9, 2015 3:30:06 PM(UTC)
Quadamp

Rank: Member

Groups: Member
Joined: 11/28/2013(UTC)
Posts: 28
United Kingdom
Location: Pudsey

Thanks: 1 times


Changed dips as advised.

I now have lights as follows.
TRAN ERR Red (was green)
Unlock green (was red)
Non audio red (was green)
gen flag green was red)

Should all lights be green ?

Fed from both marantz cd player and also linn Genki player SPDIF out with no change to light status.

Still struggling to get a squeak out of the thing.
I don't have a scope but do have a multi-meter. Is there anything i can measure in terms of voltage.
I checked the digital lead from the cd player and this is good (ohms) no shorts and both leads intact.

Brian Donegan  
#17 Posted : Friday, January 9, 2015 3:46:49 PM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
You still get no I2S output?

Is it possible you have some of the LEDs installed backwards (Red ones)? You can check the voltage at each LED, looking for + or - voltages (reversing polarity changes color).

Edited by user Friday, January 9, 2015 3:54:00 PM(UTC)  | Reason: Not specified

Quadamp  
#18 Posted : Friday, January 9, 2015 9:00:25 PM(UTC)
Quadamp

Rank: Member

Groups: Member
Joined: 11/28/2013(UTC)
Posts: 28
United Kingdom
Location: Pudsey

Thanks: 1 times
many thanks. will check monday as you advised
Quadamp  
#19 Posted : Thursday, January 15, 2015 5:21:03 PM(UTC)
Quadamp

Rank: Member

Groups: Member
Joined: 11/28/2013(UTC)
Posts: 28
United Kingdom
Location: Pudsey

Thanks: 1 times
Have all green lights now .. But when I measure voltage across each led I get.

Trans error 2 v
unlock -2v (was red the other way round
non audio 2 v
gen flag -2 v. (was red the other way round)

Is this correct.

Is there any voltages I can measure from the transceiver to the dac or from the dac to indicate I have some audio signal.

Regards


Brian Donegan  
#20 Posted : Thursday, January 15, 2015 6:14:11 PM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
Equal voltage direction is what you are looking for, so it seems the Unlock and GenFlag leds are now backwards )-2V should be red).
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.