Rank: Member
Groups: Member
Joined: 11/11/2014(UTC) Posts: 11 Location: Omaha, Nebraska Thanks: 3 times
|
Hi, I had to order a replacement 47uf capacitor for C3, and I quickly ordered by the Mouser# in the Parts list. Unfortunately, after it came I realized the ones on the board were 25V, not 50V as in the part list. I am also unsure if a MKS Film Capacitor I ordered (Mouser 505-MKS2.22/63/10) is the same as the others as it appears slightly different. I do have the 2.1. Is the part list up to date? What are the correct parts? Thank you.
Trav
|
|
|
|
Rank: Administration
Groups: Administration, Customer Joined: 10/24/2006(UTC) Posts: 2,868 Location: Massachusetts, USA
Thanks: 2 times Was thanked: 141 time(s) in 134 post(s)
|
The 25V cap is fine. It is what I was initially using during prototyping/testing. I switched to the 50V because I could ore easily get them on tape, which makes kitting easier (for me). I still have a bunch of the 25V parts and use them as stock backup when I run out of 50V from time to time.
Wima caps often look different, as different machines/plants use different printing/stamps. If you got it from Mouser, it's the right part.
|
|
|
|
Rank: Member
Groups: Member
Joined: 11/11/2014(UTC) Posts: 11 Location: Omaha, Nebraska Thanks: 3 times
|
Thanks; that explains that. I stupidly put one backwards then squished it when removing. All the others are in place -- 25v ones. Sound quality wise, would it be better to replace them all with 50v? If equivalent, I would rather not take things out, so what model is the 25v?
|
|
|
|
Rank: Administration
Groups: Administration, Customer Joined: 10/24/2006(UTC) Posts: 2,868 Location: Massachusetts, USA
Thanks: 2 times Was thanked: 141 time(s) in 134 post(s)
|
There is no need to swap. The only difference in this case is the voltage rating, so unless you are running voltages above 25v, there is no reason to.
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.