Rank: Member
Groups: Member
Joined: 8/15/2012(UTC) Posts: 6  Location: Moscow Thanks: 1 times
|
Hi All,
Looking for your help! Some time ago I accomplished the following set - Buffalo II+ Trident, Legato 3.1, Placid HD_BP, LCDPS. Everything worked just fine until I left it for several months :))
After that period there was no sound at all, I've checked the voltage and it was twice more on Buffulo (10 or 12V), I don't know why. Outputs both from Placid HD_BP, LCDPS seem to be ok, tridents are alive as well. What should I do to restart my DAC!!!! Please help!
Thanks in advance and greetings from Moscow!
|
|
|
|
|
|
Rank: Member
Groups: Member
Joined: 6/17/2008(UTC) Posts: 921  Thanks: 1 times
Was thanked: 70 time(s) in 69 post(s)
|
Quote:
I've checked the voltage and it was twice more on Buffulo (10 or 12V)"
Pls explain. Where did you measure the 10-12V ?
|
|
|
|
|
|
Rank: Member
Groups: Member
Joined: 8/15/2012(UTC) Posts: 6 Location: Moscow Thanks: 1 times
|
[img]null[/img] Originally Posted by: avr300  Quote:
I've checked the voltage and it was twice more on Buffulo (10 or 12V)"
Pls explain. Where did you measure the 10-12V ? LCDPS output. See the picture of my setup below (this is my first experience)  Edited by user Thursday, August 16, 2012 6:57:25 PM(UTC)
| Reason: Not specified
|
|
|
|
|
|
Rank: Member
Groups: Member
Joined: 6/17/2008(UTC) Posts: 921 Thanks: 1 times
Was thanked: 70 time(s) in 69 post(s)
|
By that do you mean that the Buffalo has had 10v on it's 5v input ?
|
|
|
|
|
|
Rank: Member
Groups: Member
Joined: 8/15/2012(UTC) Posts: 6 Location: Moscow Thanks: 1 times
|
Originally Posted by: avr300 By that do you mean that the Buffalo has had 10v on it's 5v input ? Exactly. Previously I tuned everything and it worked. Then the voltage have changed in itself. I retuned it once again, all lights are working, voltage at Tridents and Balanced outputs are Ok, but there is no sound!
|
|
|
|
|
|
Rank: Administration
Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN
Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
|
Yikes.... This requires so better close ups. :)
|
|
|
|
|
|
Rank: Member
Groups: Member
Joined: 8/15/2012(UTC) Posts: 6 Location: Moscow Thanks: 1 times
|
Originally Posted by: Russ White Yikes.... This requires so better close ups. :) Russ, thank you for setting eyes on my problem. What do I need to measure/repair??
|
|
|
|
|
|
Rank: Member
Groups: Member
Joined: 6/17/2008(UTC) Posts: 921 Thanks: 1 times
Was thanked: 70 time(s) in 69 post(s)
|
You need to take a really sharp picture, close-up of the DAC.
|
|
|
|
|
|
Rank: Member
Groups: Member
Joined: 8/15/2012(UTC) Posts: 6 Location: Moscow Thanks: 1 times
|
|
|
|
|
|
|
Rank: Member
Groups: Member
Joined: 5/23/2010(UTC)
Posts: 708
Location: Netherlands
Thanks: 2 times
Was thanked: 48 time(s) in 45 post(s)
|
Why is the firmware missing?
I'm also seeing lots of connections without any visible solder. Before you proceed I would suggest fixing that first.
|
 1 user thanked LeonvB for this useful post.
|
|
|
|
Rank: Member
Groups: Member
Joined: 8/15/2012(UTC) Posts: 6 Location: Moscow Thanks: 1 times
|
Originally Posted by: LeonvB Why is the firmware missing?
I'm also seeing lots of connections without any visible solder. Before you proceed I would suggest fixing that first. Hi, Checked connections - all of them except radiators are solded rather good. I have no firmware at all from the beginning and everything worked fine! Have changed Legato 3.1 to my previously installed Legato v1 and 100% known working and there was no sound :( Later on checked voltage on Tridents and suddenly locked Trident 1.2V - and +, after it I've got only 0,1 DC instead of 1,2 :(( Don't know was it cause or consequence but now I have 100% dead DAC board or at least Trident. How can I fix it or check it operability?
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
