Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login
Noisy Teleporters? - Are Teleporters susceptible to appliances/lights switching on and off?
Options
View
Go to last post Go to first unread
Previous Topic Next Topic
Possum  
#1 Posted : Friday, August 17, 2012 11:20:59 AM(UTC)
Possum

Rank: Member

Groups: Member
Joined: 8/5/2012(UTC)
Posts: 208
Australia

Thanks: 4 times
Was thanked: 16 time(s) in 14 post(s)
Since installing the teleporters (which otherwise sound wonderful) my system has been prone to disturbing spikes that cause the protection on the amps to trigger - mainly caused by switching on/off lights, appliances etc.

Mostly, turning on a light etc can cause the system to mute (is this a teleporter function?), but occasionally it appears to be sending dangerous digital data to the DAC which maxes out the amps.

I was already tapping into the I2S signal without such issues pronounced previously.

Any ideas?

Thanks,

Poss
Back to top

Wanna join the discussion?! Login to your Twisted Pear Audio Support forum accountor Register a new forum account.
Back to top  
Russ White  
#2 Posted : Saturday, August 18, 2012 3:26:32 AM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
You may need to connect the GNDs between the source and the destination teleporters.

You may also want to try shielded cat5.
Back to top
WWW
Possum  
#3 Posted : Saturday, August 18, 2012 3:48:29 AM(UTC)
Possum

Rank: Member

Groups: Member
Joined: 8/5/2012(UTC)
Posts: 208
Australia

Thanks: 4 times
Was thanked: 16 time(s) in 14 post(s)
Thanks Russ,

However, I was hoping to avoid connecting Gnds in this instance as it means the GND filth from my PC AND digital Xover will be pumped into the DAC (the Teleporters made an audible improvement that I am attributing to ground isolation).

Will HCPL-09xx CMOS digital isolators work with the Teleporter perchance?

Cheers,

Poss
Back to top
Russ White  
#4 Posted : Saturday, August 18, 2012 1:02:51 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Sure. If using shielded CAT5 you need not necessarily connect the shield on both ends. Just the DAC end is what I would try first.
Back to top
WWW
Russ White  
#5 Posted : Saturday, August 18, 2012 1:05:33 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
To be clear - if the GND potential of the source and the destination is more than a volt or so you should make sure they are the same. :)
Back to top
WWW
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (4)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Youtube
Copyright © Twisted Pear Audio