Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login
BIII connection with 4 ch S/PDIF input module
Options
View
Go to last post Go to first unread
Previous Topic Next Topic
toast  
#1 Posted : Sunday, September 18, 2011 8:44:23 AM(UTC)
toast

Rank: Advanced Member

Groups: Member
Joined: 3/31/2011(UTC)
Posts: 45
Location: Malaysia
Hi,
Just start to assemble the board. Am not really sure of the connection between 20pins connection from BIII board to the module.
Looking at link
The white dot that mark pin 1 of BIII is not connected to pin 1 of S/PDIF module. Is it correct connection or I didn't see correct?
Please help.
Thanks.

-Wong
Back to top

Wanna join the discussion?! Login to your Twisted Pear Audio Support forum accountor Register a new forum account.
Back to top  
LeonvB  
#2 Posted : Sunday, September 18, 2011 9:56:02 AM(UTC)
LeonvB

Rank: Member

Groups: Member
Joined: 5/23/2010(UTC)
Posts: 708
Location: Netherlands

Thanks: 2 times
Was thanked: 48 time(s) in 45 post(s)
You didn't see it correct. The dot is on the left on both boards, so 1 is correctly connected to 1.
Back to top
toast  
#3 Posted : Sunday, September 18, 2011 10:34:28 AM(UTC)
toast

Rank: Advanced Member

Groups: Member
Joined: 3/31/2011(UTC)
Posts: 45
Location: Malaysia
LeonvB wrote:
You didn't see it correct. The dot is on the left on both boards, so 1 is correctly connected to 1.


But the dot is on the lower left of BIII, while it is on the upper left of the S/PDIF module if both boards put in that position. If you reffer to the red side of the ribbon, it did look like last pin of BIII connect to first pin of S/PDIF module.
Back to top
LeonvB  
#4 Posted : Sunday, September 18, 2011 12:49:25 PM(UTC)
LeonvB

Rank: Member

Groups: Member
Joined: 5/23/2010(UTC)
Posts: 708
Location: Netherlands

Thanks: 2 times
Was thanked: 48 time(s) in 45 post(s)
Both are lower left, see the pictures: http://www.twistedpearau...com/digital/buffalo.aspx
Back to top
toast  
#5 Posted : Sunday, September 18, 2011 7:43:35 PM(UTC)
toast

Rank: Advanced Member

Groups: Member
Joined: 3/31/2011(UTC)
Posts: 45
Location: Malaysia
Hi LeonvB,
You are right. Both dots are on the upper right if arrange the board that way. I am confuse because there are 2 dots on the BIII board, and after solder in the 20pins male socket, it cover the dot suppose to meant for it. I just look at the wrong dot on BIII board.
Thanks for the clarification.
Back to top
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Youtube
Copyright © Twisted Pear Audio