Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login
Dual-Mono - How to Connect up Ballsies for Single-ended use Please! (help...)
Options
View
Go to last post Go to first unread
Previous Topic Next Topic
suffolk tony  
#1 Posted : Wednesday, August 17, 2011 5:02:44 AM(UTC)
suffolk tony

Rank: Member

Groups: Member
Joined: 9/14/2010(UTC)
Posts: 84
Location: uk
Sorry not to tag this on my Dual-Mono posts but I'm now rather stuck on something I thought I'd grasped.

I've built up to the stage where I'm just completing the final wiring-up, but I really don't understand how to connect up the inputs of the twin Ballsie Lites I've got. I've tried to grasp Leon's connection diagram that uses two Ivys into balanced outputs but how this all translates to what I want to do is beyond my very limited knowledge I'm afraid. Balanced connections aren't something I'm at all familiar with, which doesn't help.

All practical advice very gratefully received!
Back to top

Wanna join the discussion?! Login to your Twisted Pear Audio Support forum accountor Register a new forum account.
Back to top  
LeonvB  
#2 Posted : Wednesday, August 17, 2011 9:57:46 AM(UTC)
LeonvB

Rank: Member

Groups: Member
Joined: 5/23/2010(UTC)
Posts: 708
Location: Netherlands

Thanks: 2 times
Was thanked: 48 time(s) in 45 post(s)
Balanced is fairly simple: you have +, GND and -.

So from the diagram you wire it like this on one Ballsie, use either side:
On the left channel IVY: connect L_SE to IN+, and connect R_SE to IN-. GND of course goes to GND.

And on the other Ballsie, doesn't matter on what side:
On the right channel IVY: connect R_SE to IN+, and connect L_SE to IN-. GND also goes to GND.

Note: OUT and the other GND on the connector block give you the SE output.
And of course you'll want to power the Ballsies with from the Placid BP of their respective sides.
Back to top
suffolk tony  
#3 Posted : Wednesday, August 17, 2011 11:13:35 AM(UTC)
suffolk tony

Rank: Member

Groups: Member
Joined: 9/14/2010(UTC)
Posts: 84
Location: uk
Many thanks again Leon. When I thought about it for a while longer I got the gist of it, but without someone's confirmation I was loathe to proceed further. Forgot to mention I'm using Legatos but I can see they'd be the same. I'll be in the position to try everything out tomorrow. I'm excited!
Back to top
suffolk tony  
#4 Posted : Wednesday, August 17, 2011 2:22:20 PM(UTC)
suffolk tony

Rank: Member

Groups: Member
Joined: 9/14/2010(UTC)
Posts: 84
Location: uk
Sorry, forgot to ask - presumably I need to add jumpers across R9 & R10 on the Ballsies ?
Back to top
LeonvB  
#5 Posted : Thursday, August 18, 2011 9:59:47 AM(UTC)
LeonvB

Rank: Member

Groups: Member
Joined: 5/23/2010(UTC)
Posts: 708
Location: Netherlands

Thanks: 2 times
Was thanked: 48 time(s) in 45 post(s)
No, R9 and R10 are resistors and included in the package (at least with me). If they're not included with yours I'd contact Brian to ask him if it's a pick error or a change in the module.
Back to top
Russ White  
#6 Posted : Thursday, August 18, 2011 4:33:32 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
If you don't have them they can be jumpered, or any resistor from 2-21R would be fine.
Back to top
WWW
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (3)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Youtube
Copyright © Twisted Pear Audio