Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login
2 Pages12>
AVCC shunt module for ES9018 on BII is partly dead...
Options
View
Go to last post Go to first unread
Previous Topic Next Topic
pinnocchio  
#1 Posted : Friday, June 24, 2011 1:19:37 PM(UTC)
pinnocchio

Rank: Member

Groups: Member
Joined: 11/3/2010(UTC)
Posts: 169
Canada
Location: Quebec
Brian, Russ,

I'm running a Dual mono setup with Tridents and Legato 3.1. The AVCC Shunt Reg module for feeding the ES9018 on the left channel BII has partly died this morning. I'm feeding the BII with a 5.40V on LCDPS and a soft start so there is no inrush.

This has been working great for the past 3 months for this module. My right channel I had for about a year without issue... I was using it in stereo mode.

What can we do about this? I swapped the AVCC working module from one BII to the other and everything is fine.

D1 on AVCC does not light up, so the only thing that could really go wrong in there is QP1-QP4, D1 or the opamp which I doubt is defective. Do you use D1 and D2 as voltage reference in the circuit?

Since there is no schematics, it will be hard to diagnose. What voltage should I feed on IN/GND and what should be the output on OUT?

Can I buy a module directly from you? That would be appreciated...

If not, what are QP1 - QP4 mouser part number and D1 and the opamp?

I'll first wait for your answers on what to test.

Thanks
Do
Back to top

Wanna join the discussion?! Login to your Twisted Pear Audio Support forum accountor Register a new forum account.
Back to top  
pinnocchio  
#2 Posted : Friday, June 24, 2011 6:36:10 PM(UTC)
pinnocchio

Rank: Member

Groups: Member
Joined: 11/3/2010(UTC)
Posts: 169
Canada
Location: Quebec
Anyone?
Back to top
Russ White  
#3 Posted : Friday, June 24, 2011 7:27:41 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Are you sure that VD voltage is not sagging under load?
Back to top
WWW
pinnocchio  
#4 Posted : Friday, June 24, 2011 7:39:34 PM(UTC)
pinnocchio

Rank: Member

Groups: Member
Joined: 11/3/2010(UTC)
Posts: 169
Canada
Location: Quebec
Actually, to make it easier, I name the BIIs as left and right.

Left BII AVCC = defective
Right BII AVCC = working

Took right AVCC (working) and connected to left and powered up. Everything is working fine

Took left AVCC (defective) and connected to right and powered up. Nothing is working

I also look at input voltage of both BII and voltage on both BIIs is 5.40V - 5.42V. Voltage is not sagging.

Would it be better I power them lower like 5.00V - 5.25V

Thanks
Do
Back to top
Russ White  
#5 Posted : Friday, June 24, 2011 8:09:24 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Can you measure the voltage at the cathode of D1 to VD?
Back to top
WWW
Russ White  
#6 Posted : Friday, June 24, 2011 8:12:01 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Also please measure the voltage across R6 and R8. And if possible the voltage to GND from each of the opamp pins.
Back to top
WWW
pinnocchio  
#7 Posted : Friday, June 24, 2011 9:17:44 PM(UTC)
pinnocchio

Rank: Member

Groups: Member
Joined: 11/3/2010(UTC)
Posts: 169
Canada
Location: Quebec
Hi Russ,

Here's the results:

D1 cathode to VD = 0V
D2 cathode to VD = 3.32V

R6 and R8 quickly measure +/- 4V then quickly drop to 0V...

Opamp
Pin1 = 5.35V
Pin2 = 493mV
Pin3 = 2.09V
Pin4 = 0V
Pin5 = 2.09V
Pin6 = 496mV
Pin7 = 5.35V
Pin8 = 5.36V

Hope this helps

Thanks
Do
Back to top
Russ White  
#8 Posted : Saturday, June 25, 2011 3:21:34 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
To me it appears as if replacing D1 may well resolve your problem. I can't remember which exact part we use, but it is a standard intensity green 1206 LED.

The bad AVCC module is not drawing excessive current correct?
Back to top
WWW
pinnocchio  
#9 Posted : Saturday, June 25, 2011 6:26:44 PM(UTC)
pinnocchio

Rank: Member

Groups: Member
Joined: 11/3/2010(UTC)
Posts: 169
Canada
Location: Quebec
Do you have any mouser part you could suggest?

I wouldn't want to impact sound at all

Could you sell me an AVCC module?

Thanks
Do
Back to top
Russ White  
#10 Posted : Saturday, June 25, 2011 7:45:35 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
859-LTST-C150GKT should work great.
Back to top
WWW
pinnocchio  
#11 Posted : Saturday, June 25, 2011 9:05:02 PM(UTC)
pinnocchio

Rank: Member

Groups: Member
Joined: 11/3/2010(UTC)
Posts: 169
Canada
Location: Quebec
Thanks!

Will order this and test!

Do
Back to top
pinnocchio  
#12 Posted : Sunday, June 26, 2011 7:19:23 PM(UTC)
pinnocchio

Rank: Member

Groups: Member
Joined: 11/3/2010(UTC)
Posts: 169
Canada
Location: Quebec
Hi Russ,

Once I change the led D1, I would like to test the AVCC module out of the BII to ensure I don't bust it.

How much voltage should I feed VD and what should AVCC voltage be?

Can I test both AVCCs independently on the module or I have to feed them both at the same time? I'm guessing they're both positive rails?

Thanks
Do
Back to top
Russ White  
#13 Posted : Sunday, June 26, 2011 7:32:36 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
AVCC is fed by VD, so same voltage in. About 5V is fine.

Output should be ~3.45V
Back to top
WWW
pinnocchio  
#14 Posted : Monday, July 4, 2011 5:40:04 PM(UTC)
pinnocchio

Rank: Member

Groups: Member
Joined: 11/3/2010(UTC)
Posts: 169
Canada
Location: Quebec
Hi Russ,

I've replaced the led but nothing changed... The led I removed is still operational.

By feeding the VD to 4.75V (using 3x AA batt) I get an output of 3.415V on VDD and this on both sides... I have done a couple solder touch ups... Voltage is good, maybe current is not...

What is the next step please?

I don't mind paying for a new AVCC module, really I don't mind, even though I know it died by itself. I just want to listen to my muse! PLEASE ;-)


Thanks
Do
Back to top
pinnocchio  
#15 Posted : Monday, July 4, 2011 8:08:47 PM(UTC)
pinnocchio

Rank: Member

Groups: Member
Joined: 11/3/2010(UTC)
Posts: 169
Canada
Location: Quebec
Hi Russ, Brian,

I have an order I'm placing at Digikey. I'm putting it on hold in case there is another part to test.

I'm waiting for your answer

Thanks
Do
Back to top
ihear21khz  
#16 Posted : Monday, July 4, 2011 10:30:44 PM(UTC)
ihear21khz

Rank: Member

Groups: Member
Joined: 7/27/2010(UTC)
Posts: 48
Location: Malaysia

Was thanked: 1 time(s) in 1 post(s)
A simple idea while you wait for Russ: Compare the voltage readings around each component (relative to 0V rail) on both the working and failed AVCC module. If a difference shows up somewhere, you probably have found the faulty component.

Cheers
DF

Edited by user Monday, July 4, 2011 10:35:52 PM(UTC)  | Reason: Not specified
Back to top
pinnocchio  
#17 Posted : Tuesday, July 5, 2011 6:52:35 PM(UTC)
pinnocchio

Rank: Member

Groups: Member
Joined: 11/3/2010(UTC)
Posts: 169
Canada
Location: Quebec
Thanks DF. Unfortunately sometimes this will also point to the part right after the one that is defective. I really don't want to mess with the working module and then have both defective...

I'll wait for Russ or Brian to answer me.

I do appreciate your suggestion, I'm just too chicken right now... ;-)

Thanks
Do
Back to top
Russ White  
#18 Posted : Wednesday, July 6, 2011 3:57:52 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
I think DF's suggestion is a good one. And should not cause any harm as long as you are careful.

I am sure we can get you a new AVCC module if yours is dead.
Back to top
WWW
pinnocchio  
#19 Posted : Wednesday, July 6, 2011 6:45:13 PM(UTC)
pinnocchio

Rank: Member

Groups: Member
Joined: 11/3/2010(UTC)
Posts: 169
Canada
Location: Quebec
Russ,

Do I have to power both VD individually or one side powers both?

I've started to test but I'm really nervous since components are SMD and are packed really close to each other.

Thanks
Do
Back to top
toast  
#20 Posted : Wednesday, July 6, 2011 7:29:04 PM(UTC)
toast

Rank: Advanced Member

Groups: Member
Joined: 3/31/2011(UTC)
Posts: 45
Location: Malaysia
Pinnocchio,
You have breadboards? You should use that to hold down the AVCC module, supply voltage to it and test it with small probe and steady hand, slowly does it. Good luck.
Back to top
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (14)
2 Pages12>
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Youtube
Copyright © Twisted Pear Audio