Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
benno  
#1 Posted : Monday, May 9, 2011 3:54:19 PM(UTC)
benno

Rank: Member

Groups: Member
Joined: 1/4/2011(UTC)
Posts: 19
Location: Melbourne, Australia

Ok, I've assembled my Opus and my pair of Ventuses (Venti? Ventae?). I had a problem with noise on one Ventus board that turned out to be due to a dodgy solder joint on one of the power supply caps, but that appears to be resolved.

So I hooked up the Opus to the inputs and set about removing the DC offset. I've noticed that the voltage present changes with time so I left it for a while to warm up and then adjusted the offset out. However, after leaving it for a while longer, I've noticed that some voltage returns, generally somewhere between -1mV and 1mV.

Is this normal? Or is this indicative of some issue in my build?
Russ White  
#2 Posted : Monday, May 9, 2011 4:10:58 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
1mv offset is generally nothing to worry about. If you really need something lower than that you might just need an AC coupling cap.
benno  
#3 Posted : Monday, May 9, 2011 4:20:48 PM(UTC)
benno

Rank: Member

Groups: Member
Joined: 1/4/2011(UTC)
Posts: 19
Location: Melbourne, Australia

Thanks. =)
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.