Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

2 Pages12>
Options
View
Go to last post Go to first unread
felipe  
#1 Posted : Monday, April 27, 2020 10:31:03 PM(UTC)
felipe

Rank: Member

Groups: Member
Joined: 12/6/2009(UTC)
Posts: 344
Location: Catalonia new Europe state

Thanks: 4 times
Was thanked: 1 time(s) in 1 post(s)
With the confinament I started mine long journey to install the Chronus but I can't listen nothing!

My setup consist: Amanero + I2S isolator + Chronus = noDac

Amanero is connected to I2S isolator properly:
-POWER from Amanero
-FSCLK
-BCLK
-DATA

I2S isolator is connected:
-POWER from Chronus pin 19 gnd & pin 20 3.3V to isolator
-FSCLK from isolator to pin 12 gnd & pin 2 D1 Chronus
-BCLK from isolator to pin 10 gnd & pin 1 DCK IN

Chronus is connected:
-DCK ufl connector to MCLK Amanero?
-D1 left channel output
-D2 right channel output
-One jumper is set to MCK+
-The other jumper is set to J1.1

It's possible can't works because I use NDK SDA 22,xxx & 24,xxx clocks but don't installed C1 0.01uF C0G in the Rhea module?



TIA
Felipe

N.B. My player Daphile plays normally without any problem the only is that can't listen music.
felipe  
#2 Posted : Thursday, April 30, 2020 5:42:26 PM(UTC)
felipe

Rank: Member

Groups: Member
Joined: 12/6/2009(UTC)
Posts: 344
Location: Catalonia new Europe state

Thanks: 4 times
Was thanked: 1 time(s) in 1 post(s)
I'm using 22,xxx & 24,xxx clocks
felipe  
#3 Posted : Saturday, May 2, 2020 9:46:18 AM(UTC)
felipe

Rank: Member

Groups: Member
Joined: 12/6/2009(UTC)
Posts: 344
Location: Catalonia new Europe state

Thanks: 4 times
Was thanked: 1 time(s) in 1 post(s)
Please support.
Possum  
#4 Posted : Sunday, May 3, 2020 12:43:59 AM(UTC)
Possum

Rank: Member

Groups: Member
Joined: 8/5/2012(UTC)
Posts: 172
Australia

Thanks: 4 times
Was thanked: 8 time(s) in 6 post(s)
You say you have connected it up as follows:

Chronus is connected:
-DCK ufl connector to MCLK Amanero?
-D1 left channel output
-D2 right channel output

This will not work.

MCLK, DCLK,D1 & D2 must all go to the corresponding connectors on the DAC. I'd try it without MCLK connected first (async mode)
felipe  
#5 Posted : Sunday, May 3, 2020 2:07:01 PM(UTC)
felipe

Rank: Member

Groups: Member
Joined: 12/6/2009(UTC)
Posts: 344
Location: Catalonia new Europe state

Thanks: 4 times
Was thanked: 1 time(s) in 1 post(s)
I don't have DAC because I only listen DSD so only LPF.

I tried DCK & MCK output to Amanero both no sound, Amanero running as slave.

Edited by user Sunday, May 3, 2020 2:07:55 PM(UTC)  | Reason: Not specified

Possum  
#6 Posted : Sunday, May 3, 2020 2:11:22 PM(UTC)
Possum

Rank: Member

Groups: Member
Joined: 8/5/2012(UTC)
Posts: 172
Australia

Thanks: 4 times
Was thanked: 8 time(s) in 6 post(s)
If you dont have a DAC it will never work.

felipe  
#7 Posted : Sunday, May 3, 2020 2:20:22 PM(UTC)
felipe

Rank: Member

Groups: Member
Joined: 12/6/2009(UTC)
Posts: 344
Location: Catalonia new Europe state

Thanks: 4 times
Was thanked: 1 time(s) in 1 post(s)
Playing DSD not needed the DAC only LPF.
felipe  
#8 Posted : Tuesday, May 5, 2020 1:36:22 PM(UTC)
felipe

Rank: Member

Groups: Member
Joined: 12/6/2009(UTC)
Posts: 344
Location: Catalonia new Europe state

Thanks: 4 times
Was thanked: 1 time(s) in 1 post(s)
Please support!
felipe  
#9 Posted : Thursday, May 7, 2020 1:40:13 PM(UTC)
felipe

Rank: Member

Groups: Member
Joined: 12/6/2009(UTC)
Posts: 344
Location: Catalonia new Europe state

Thanks: 4 times
Was thanked: 1 time(s) in 1 post(s)
Still trying to find the solution!!!
felipe  
#10 Posted : Monday, May 11, 2020 1:47:22 PM(UTC)
felipe

Rank: Member

Groups: Member
Joined: 12/6/2009(UTC)
Posts: 344
Location: Catalonia new Europe state

Thanks: 4 times
Was thanked: 1 time(s) in 1 post(s)
Please support.
felipe  
#11 Posted : Tuesday, May 12, 2020 1:54:31 PM(UTC)
felipe

Rank: Member

Groups: Member
Joined: 12/6/2009(UTC)
Posts: 344
Location: Catalonia new Europe state

Thanks: 4 times
Was thanked: 1 time(s) in 1 post(s)
Stll not enjoying the Chronus.
felipe  
#12 Posted : Wednesday, May 13, 2020 1:33:52 PM(UTC)
felipe

Rank: Member

Groups: Member
Joined: 12/6/2009(UTC)
Posts: 344
Location: Catalonia new Europe state

Thanks: 4 times
Was thanked: 1 time(s) in 1 post(s)
Please support.
felipe  
#13 Posted : Thursday, May 14, 2020 4:01:21 PM(UTC)
felipe

Rank: Member

Groups: Member
Joined: 12/6/2009(UTC)
Posts: 344
Location: Catalonia new Europe state

Thanks: 4 times
Was thanked: 1 time(s) in 1 post(s)
Please support.
felipe  
#14 Posted : Friday, May 15, 2020 1:35:14 PM(UTC)
felipe

Rank: Member

Groups: Member
Joined: 12/6/2009(UTC)
Posts: 344
Location: Catalonia new Europe state

Thanks: 4 times
Was thanked: 1 time(s) in 1 post(s)
I need support, thanks.
felipe  
#15 Posted : Saturday, May 16, 2020 2:28:49 PM(UTC)
felipe

Rank: Member

Groups: Member
Joined: 12/6/2009(UTC)
Posts: 344
Location: Catalonia new Europe state

Thanks: 4 times
Was thanked: 1 time(s) in 1 post(s)
Support please!
kesgreen  
#16 Posted : Saturday, May 16, 2020 5:42:00 PM(UTC)
kesgreen

Rank: Member

Groups: Member
Joined: 1/12/2009(UTC)
Posts: 146
Location: London

Thanks: 15 times
Was thanked: 1 time(s) in 1 post(s)
Hi felipe, you might have better luck on https://www.diyaudio.com...2007-cronus-time-89.html

More people are likely to read it,
felipe  
#17 Posted : Saturday, May 16, 2020 6:56:55 PM(UTC)
felipe

Rank: Member

Groups: Member
Joined: 12/6/2009(UTC)
Posts: 344
Location: Catalonia new Europe state

Thanks: 4 times
Was thanked: 1 time(s) in 1 post(s)
Thanks for answer. I posted the problem also on diyAudio but also no lucky.
felipe  
#18 Posted : Sunday, May 17, 2020 2:50:08 PM(UTC)
felipe

Rank: Member

Groups: Member
Joined: 12/6/2009(UTC)
Posts: 344
Location: Catalonia new Europe state

Thanks: 4 times
Was thanked: 1 time(s) in 1 post(s)
Please support.
felipe  
#19 Posted : Monday, May 18, 2020 1:17:16 PM(UTC)
felipe

Rank: Member

Groups: Member
Joined: 12/6/2009(UTC)
Posts: 344
Location: Catalonia new Europe state

Thanks: 4 times
Was thanked: 1 time(s) in 1 post(s)
Please be so kind to give support!
felipe  
#20 Posted : Tuesday, May 19, 2020 3:49:23 PM(UTC)
felipe

Rank: Member

Groups: Member
Joined: 12/6/2009(UTC)
Posts: 344
Location: Catalonia new Europe state

Thanks: 4 times
Was thanked: 1 time(s) in 1 post(s)
Still waiting support.
Rss Feed  Atom Feed
Users browsing this topic
2 Pages12>
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.